Using A Frame Pattern To Create Appliqués (1) - Brother 882-T51 Operation Manual

f After attaching the appliqué piece,
embroider an "APPLIQUE" pattern. The
appliqué is finished.
• Depending on the pattern, an "APPLIQUE" pattern
may not be available. In this case, embroider the
appliqué using thread in the color of a part of the
embroidery.
g Finish embroidering.
Using a frame pattern to create
appliqués (1)
Appliqués can be created by embroidering two
frame patterns of the same size and shape—one
embroidered with straight stitches and the other
embroidered with satin stitches.
a Select a frame pattern sewn with straight
stitches to embroider onto the fabric for the
appliqué. Carefully cut outside of the
stitching.
b Embroider the same pattern on the base
fabric.
c Lightly apply fabric glue or spray adhesive
to the back of the appliqué piece that was
cut out in step , and then attach the
a
appliqué piece to the base fabric.
d Select the satin-stitched frame pattern with
the same shape to embroider the appliqué
attached in step
c
1 Appliqué
Note
• If the size or position of the straight-stitched
frame pattern is changed, be sure to
change the size or position of the satin-
stitched frame pattern in the same way.
APPENDIX
.
155
7