Saving Embroidery Patterns To Usb Media; Saving Embroidery Patterns In The Computer - Brother 882-T51 Operation Manual

Saving embroidery patterns to
USB media
When sending embroidery patterns from the
machine to USB media, plug the USB media into
the machine's USB port.
Memo
• USB media is commercially available, but
some USB media may not be usable with
this machine. Please visit our website
( http://support.brother.com ) for more
details.
• Depending on the type of USB media being
used, either directly plug the USB device
into the machine's USB port or plug the
USB media Reader/Writer into the
machine's USB port.
• The USB media can be inserted or removed
at any time.
a Touch when the pattern you want to
save is in the embroidering screen.
b Insert the USB media into the USB port on
the machine.
1 USB port
2 USB media
Note
• Do not insert anything other than USB
media into the USB media port. Otherwise,
the USB media drive may be damaged.
114
c Touch .
* Touch to return to the original screen without
saving.
→ The "Saving..." screen is displayed. When the
pattern is saved, the display returns to the original
screen automatically.
Note
• Do not insert or remove USB media while
"Saving..." screen is displayed. You will
lose some or all of the pattern you are
saving.
Saving embroidery patterns in
the computer
Using the included USB cable, the machine can
be connected to your computer, and the
embroidery patterns can be temporarily retrieved
from and saved in the "Removable Disk" folder in
your computer. An approximate of 772 KB of
embroidery patterns can be saved in the
"Removable Disk", but the saved embroidery
patterns are deleted when the machine is turned
OFF.
For Computers and Operating Systems, refer to
"Recalling from the computer" on page 117.
Note
• Do not turn the main power to OFF while the
"Saving..." screen is displayed. You will
lose the pattern you are saving.