Brother 882-T51 Operation Manual page 84

• The embroidery frame is replaced while the pattern
editing screen or the embroidering screen is
displayed, and then the key for checking the
embroidering area, for moving the embroidery
frame, or for starting embroidering is touched.
The embroidery frame will move.
Since the embroidery frame is moved to the correct
position and paused, touch the desired key again.
If the pattern extends out of the embroidering area for
the frame after the frame is moved, a message
appears, indicating that the embroidery frame should
be replaced. Either replace the embroidery frame or
return to the pattern editing screen and adjust the
pattern size or embroidering position.
82