Brother 882-T51 Operation Manual page 52

e Wind the thread clockwise once around the
thread tension disc.
1 Thread tension disc
• Make sure that the thread is securely caught in the
thread tension disc.
1 Pass around here.
f Pass the thread through the middle thread
guide under the guide plate from the left.
1 Guide plate
50
g Pass the thread along the slot to pass it
through the thread take-up lever hole from
the right side.
1 Thread take-up lever
h Drawing it down through the slot in the
thread guide, then through the hole in the
cover.
1 Hole in the cover