Changing The Size Of A Pattern - Brother 882-T51 Operation Manual

Changing the size of a pattern

a Touch .
→ The screen shown below appears.
1
2
3
4
5
Example: Original size
1 Reduces only in the vertical direction.
2 Enlarges without changing the height-
to-width proportion.
3 Reduces without changing the height-
to-width proportion.
4 Enlarges only in the vertical direction.
5 Touch this key to return the pattern to its original
size.
6 Moves the pattern in the direction of the arrow on
the key.
7 Reduces only in the horizontal direction.
8 Enlarges only in the horizontal direction.
9 Touch this key to close this screen.
0 Touch this key to select the pattern to edit.
122
b Touch the keys to adjust the pattern to the
desired size.
Each touch of a key slightly enlarges or reduces the
pattern.
The size of the pattern is displayed after a key is
touched to change it.
1 Vertical length
2 Horizontal width
• The size that the pattern can be enlarged depending
6
on the pattern or character.
• If the pattern is rotated, the vertical and horizontal
directions may be reversed.
7
• To return the pattern to its original size, touch
8
c If necessary, touch the arrow keys to adjust
9
the position of the pattern.
0
For more details, refer to "Moving a pattern" on
page 121.
d After making the desired changes, touch
.
→ The pattern editing screen appears again.
• After changing the size of the pattern, check
the icons for the embroidery frames that can
be used and use only the indicated frames. If a
frame other than those indicated are used, the
presser foot may hit the embroidery frame and
cause injuries.
1
2
CAUTION
.