Table of Contents
Advertisement
■ Oiling the needle bar
Put one drop of oil on the lower needle bar felt
washer.
1 Apply oil here.
• Too much oil may drip onto sewing project.
Note
• Put a drop of oil onto the hook once a day
before use.
• Apply one drop of oil on the lower needle
bar above the felt washer every 40 – 50
hours of embroider time.
• Apply only sewing machine oil. Use of any
other type of oil may result in damage to the
embroidery machine.
• Do not apply too much oil. Fabric or thread
may become contaminated. If too much oil
is applied, wipe off any excess with a rag.
• If the thread breaks while embroidering or
the operating noise of the hook becomes
loud, apply oil onto the race hook.
About the maintenance message
Once this message appears, it is recommended to
take your machine to an authorized Brother dealer
for a regular maintenance check. Although this
message will disappear and the machine will
continue to function once you touch
message will display several more times until the
appropriate maintenance is performed.
Please take the time to arrange the maintenance
your machine requires once this message appears.
Such steps will help to ensure you receive
continued, uninterrupted hours of machine
operation for the future.
APPENDIX
, the
7
169
Advertisement
Chapters
Table of Contents
