Embroidery Color Management; Uninterrupted Embroidering (Monochrome - Using A Single Color); Thread Color Sorting - Brother 882-T51 Operation Manual

Embroidery Color Management

Uninterrupted embroidering
(monochrome - using a single
color)
A selected pattern can be stitched out in one color
instead of multicolor. The machine will hesitate
but not stop between color steps, and then
continue till the pattern is completed. Touch
for the multicolor steps to become shaded and the
selected pattern will embroider in a single color,
instead of changing the thread while
embroidering. Touch
pattern's original settings.
→ The thread color displayed on the screen will be
grayed out.
Memo
• Even if uninterrupted embroidering has
been set, the automatic thread cutting
function and the thread trimming function
can be used (refer to page 101).
• After finishing the embroidery, uninterrupted
embroidery will be canceled.
100
again to return to the

Thread color sorting

You can embroider while replacing the thread
spool a minimal number of times.
Before starting to embroider, touch
rearrange the embroidery order and sort it by
thread colors. Touch
sorting and embroider with the embroidery color
order.
→ The embroidery color order is rearranged and sorted
by thread colors.
Note
• The thread color sorting function cannot be
used with overlapping patterns.
to
to cancel the color