Brother 882-T51 Operation Manual page 180

The patterns you are editing take up too
much memory, or you are editing too
many patterns for the memory.
Another operation was performed while
the automatic threading mechanism was
threading the needle.
Press the "Automatic Threading" button,
and then perform the other operation
after the needle is threaded. (Refer to
page 51.)
This message is displayed when the
memory is full and the stitch or pattern
cannot be saved.
178
You can start embroidering only when
you go to the embroidering screen, and
then touch
Too many patterns are being combined
for the amount of memory available.
Delete some patterns from the
combined pattern.
The memory capacity of the USB media
has been exceeded.
There is too much data in either the
machine or the USB media.
The automatic threading mechanism did
not operate correctly.
Remove the thread entangled in the
key.
automatic threading mechanism, and
then touch
The pattern could not be saved because
the memory is full.
Delete some patterns.
was touched in the embroidering
screen.
Touch to return to the
embroidering settings screen. The
previous embroidery in the
embroidering screen will be canceled.
.