Rotating A Pattern - Brother 882-T51 Operation Manual

Rotating a pattern

The pattern can be rotated between 1 and 359
degrees either clockwise or counterclockwise.
a Touch .
→ The screen shown below appears.
1
2
3
4
5
Example: Original angle
1 Rotates 10 degrees to the right
2 Rotates 90 degrees to the right
3 Rotates 90 degrees to the left
4 Rotates 10 degrees to the left
5 Touch this key to return the pattern to its original
angle.
6 Moves the pattern in the direction of the arrow on
the key.
7 Rotates 1 degree to the right
8 Rotates 1 degree to the left
9 Touch this key to close this screen.
0 Touch this key to select the pattern to edit.
SELECTING/EDITING/SAVING PATTERNS
b Touch the keys to adjust the pattern to the
desired angle.
Each touch of a key rotates the pattern.
1
1 Shows the angle of the pattern after a key is
touched to change it.
• To return the pattern to its original angle, touch
c If necessary, touch the arrow keys to adjust
the position of the pattern.
6 For more details, refer to "Moving a pattern" on
page 121.
d After making the desired changes, touch
7
.
8
→ The pattern editing screen appears again.
9
0
• After changing the angle of the pattern, check
the icons for the embroidery frames that can
be used and use only the indicated frames. If a
frame other than those indicated are used, the
presser foot may hit the embroidery frame and
cause injuries.
Memo
• If
the entire combined pattern can be rotated.
(For details, refer to "Rotating the entire
pattern" on page 137.)
• If the pattern is too large or the pattern is
too close to the edge of the embroidery
field, rotating options may not apply.
.
CAUTION
in the embroidering screen is used,
5
123