Changing The Thread Density; Frame Patterns); Reduces Thread Density; Increases Thread Density - Brother 882-T51 Operation Manual

Changing the thread density

(only for some character and

frame patterns)

The thread density for some character and frame
patterns can be changed.
A setting between 80% and 120% in 5%
increments can be specified.
a Touch .
→ The screen shown below appears.
1
2

1 Reduces thread density

2 Increases thread density

3 Touch this key to close this screen.
■ Reduces thread density
Less Standard
■ Increases thread density
Less Standard
b Touch the keys to select the desired thread
density.
Each touch of a key slightly increases or decreases the
thread density.
• To return to the original thread density (standard),
select "100%".
126
c After making the desired changes, touch
→ The pattern editing screen appears again.

Specifying multi-color text

The alphabet pattern characters selected on
page 108 are set to black. The color of the
characters can be changed using the change
thread color key; however, to change the color of
individual characters, touch the Multi Color key to
turn it on, and then specify the color for each
character.
a Touch
• Each touch of the key turns the setting either on or off.
3
Multi-color text
turned off
• For details on changing the thread color, refer to
"Changing the colors of the pattern" on page 127.
More
More
.
so that it changes to
Multi-color text
turned on
.