Brother 882-T51 Operation Manual page 51

a Place the thread spool on any spool pin
among the 4 positions. Push the spool cap
onto the spool pin as far as possible to
secure the thread spool.
2
3
1 Spool cap
2 Thread spool
3 Spool pin
• When using small spools of thread, be sure to place
the included spool mat on the spool pin before
placing the spool on the pin.
1 Spool mat
2 Small spool
3 Spool cap
EMBROIDERING TUTORIAL
b Pass the thread from the back to the front
through the hole in the thread guide just
above the spool.
1 Hole in the thread guide above the spool
c Pull the thread toward you through the
inside of the front hole in the thread guide.
1 Front hole in the thread guide
d Hold the thread with both hands, and then
pass it under the guide plate from the left.
1 Guide plate
2
49