Attaching The Embroidery Frame Holder E - Brother 882-T51 Operation Manual

d Secure the embroidery frame holder with
the two thumb screws removed in step
1 Thumb screws
Note
• Using the disc-shaped screwdriver
included, firmly tighten the thumb screws.
Attaching the embroidery frame
holder e
Attach the embroidery frame holder e when using
the compact frame.
a Use the embroidery frame holder
appropriate for the embroidery frame that
you are using. (Refer to "Embroidery frame
types and applications" on page 74.)
b Remove the two thumb screws of the
embroidery frame holder.
1 Thumb screws
22
c Insert the pins on the frame-mounting plate
. of the carriage into the holes on both sides
b
of the mounting plate of embroidery frame
holder e.
b
1 Pins on the frame-mounting plate of the carriage
2 Holes in the mounting plate of embroidery frame
holder e
d Install and tighten the two thumb screws
removed in step
Note
• Using the disc-shaped screwdriver
included, firmly tighten the thumb screws.
a
b
.