Packing Ex9200 Switch Components For Shipping - Juniper EX9214 Hardware Manual

EX9214 Switch Hardware Guide

Packing EX9200 Switch Components for Shipping

Related
Documentation
254
Securely tape the box closed or place the crate cover over the switch.
12.
Write the RMA number on the exterior of the box to ensure proper tracking.
13.
To pack EX9200 switch components, follow the instructions here.
Before you begin packing a switch component, ensure that you have the following parts
and tools available:
Antistatic bag, one for each component
ESD grounding strap
CAUTION: Do not stack switch components. Return individual components
in separate boxes if they do not fit together on one level in the shipping box.
To pack EX9200 switch components:
Place individual components in antistatic bags.
Use the original packing materials if they are available. If the original packing materials
are not available, ensure the component is adequately packed to prevent damage
during transit. The packing material you use must be able to support the weight of the
component.
Ensure that the components are adequately protected by wrapping them well with
packing materials. Pack the component in an oversized box (if the original box is not
available) with extra packing material around the unit so that the component is
prevented from moving around inside the box.
Securely tape the box closed.
Write the RMA number on the exterior of the box to ensure proper tracking.
Returning an EX9200 Switch or Component for Repair or Replacement on page 243
Parts Inventory (Packing List) for an EX9204 Switch
Parts Inventory (Packing List) for an EX9208 Switch
Parts Inventory (Packing List) for an EX9214 Switch on page 127
Copyright © 2015, Juniper Networks, Inc.