Juniper EX9214 Hardware Manual page 197

Related
Documentation
Copyright © 2015, Juniper Networks, Inc.
To remove the switch using a lift:
Use the appropriate screwdriver to remove the mounting screws that attach the
1.
chassis front-mounting brackets to the rack or cabinet.
Move the lift to the rack and position it so that its platform is centered about 0.5 in.
2.
(1.27 cm) below the bottom of the switch chassis and as close to it as possible.
Carefully slide the switch from the adjustable mounting brackets attached to the rack
3.
onto the lift.
Use the lift to transport the switch to its new location.
4.
Mounting an EX9200 Switch on a Rack or Cabinet Using a Mechanical Lift on page 134
Chapter 15: Removing the Switch
173