Juniper EX9214 Hardware Manual page 191

Related
Documentation
Copyright © 2015, Juniper Networks, Inc.
root@switch# commit
When you have finished configuring the switch, exit configuration mode.
17.
[edit]
root@switch# exit
root@switch>
NOTE: To reinstall Junos OS, you boot the switch from the removable media.
Do not insert the removable media during normal operations. The switch
does not operate normally when it is booted from the removable media.
When the switch boots from the storage media (removable media, CompactFlash card,
or hard disk) it expands its search in the
following files in the following order:
(the rescue configuration file), and
When the first configuration file is found that can be loaded properly, the search ends
and the file is loaded. If none of the file can be loaded properly, the routing platform does
not function properly. If the switch boots from an alternate boot device, Junos OS displays
a message indication this when you log in to the switch.
EX9204 Switch Hardware Overview
EX9208 Switch Hardware Overview
EX9214 Switch Hardware Overview on page 3
Chapter 14: Performing Initial Configuration
directory of the routing platform for the
/config
(the main configuration file),
juniper.conf
juniper.conf.1 (the first rollback configuration file).
rescue.conf
167