Juniper EX9214 Hardware Manual page 332

EX9214 Switch Hardware Guide
Power Cable Warning (Japanese)
WARNING: The attached power cable is only for this product. Do not use the cable for another product.
Related
Documentation
308
removed to prevent electric shock. To disconnect power, unplug all power cords (one
for each power supply).
General Safety Guidelines and Warnings on page 271
General Electrical Safety Guidelines and Warnings on page 303
Multiple Power Supplies Disconnection Warning on page 318
Connecting AC Power to an EX2200 Switch
Connecting AC Power to an EX3200 Switch
Connecting AC Power to an EX3300 Switch
Connecting AC Power to an EX4200 Switch
Connecting AC Power to an EX4300 Switch
Connecting AC Power to an EX4500 Switch
Connecting AC Power to an EX4550 Switch
Connecting AC Power to an EX4600 Switch
Connecting AC Power to an EX6200 Switch
Connecting AC Power to an EX8200 Switch
Connecting AC Power to an EX9204 Switch
Connecting AC Power to an EX9208 Switch
Connecting AC Power to an EX9214 Switch on page 145
Connecting AC Power to an XRE200 External Routing Engine
Connecting AC Power to an OCX1100 Switch
Connecting AC Power to a QFX3100 Director Device
Connecting AC Power to a QFX3008-I Interconnect Device with Single-Phase Wiring
Trays
Connecting AC Power to a QFX3008-I Interconnect Device with Three-Phase Delta Wiring
Trays
Copyright © 2015, Juniper Networks, Inc.