Compliance Statements For Emc Requirements For Ex Series Switches - Juniper EX9214 Hardware Manual

EX9214 Switch Hardware Guide
Related
Documentation
Battery Compliance Statement for Environmental Requirements for EX Series Switches
Related
Documentation

Compliance Statements for EMC Requirements for EX Series Switches

322
EN 55024
EN 300386
EN 61000-3-2 Power Line Harmonics
EN 61000-3-3 Voltage Fluctuations and Flicker
EN 61000-4-2 ESD
EN 61000-4-3 Radiated Immunity
EN 61000-4-4 EFT
EN 61000-4-5 Surge
EN 61000-4-6 Low Frequency Common Immunity
EN 61000-4-11 Voltage Dips and Sags
Compliance Statements for EMC Requirements for EX Series Switches on page 322
Compliance Statements for Acoustic Noise for EX Series Switches on page 326
EX6200 and EX8200 Ethernet switches contain lithium batteries.
Batteries used in these switches are not based on substances containing mercury, lead,
or cadmium. The batteries used in these switches comply with EU Directives 91/157/EEC,
93/86/EEC, and 98/101/EEC. The product documentation includes instructional
information on the proper method of reclamation and recycling.
Agency Approvals for EX Series Switches on page 321
Compliance Statements for EMC Requirements for EX Series Switches on page 322
This topic applies to hardware devices in the EX Series product family, which includes
EX Series switches, the EX Series Redundant Power System (RPS), and the XRE200
External Routing Engine.
This topic describes the EMC requirements for these hardware devices for:
Canada on page 323
European Community on page 323
Israel on page 323
Japan on page 324
Korea on page 324
United States on page 324
Copyright © 2015, Juniper Networks, Inc.