Juniper EX9214 Hardware Manual page 42

EX9214 Switch Hardware Guide
Related
Documentation
18
Table 8: FRUs in an EX9200 Switch (continued)
FRU
Switch Fabric module (SF module)
Line cards
SFP, SFP+, QSFP+, and CFP transceivers
See "Pluggable Transceivers Supported on
EX9200 Switches" on page 87
release in which the transceivers were introduced.
NOTE: Line cards are not part of the base or redundant configuration. You
must order them separately.
NOTE: If you have a Juniper J-Care service contract, register any addition,
change, or upgrade of hardware components at
https://www.juniper.net/customers/support/tools/updateinstallbase/
to do so can result in significant delays if you need replacement parts. This
note does not apply if you replace existing components with the same type
of component.
Line Card Model and Version Compatibility in an EX9200 Switch on page 49
EX9204 Switch Hardware Overview
EX9208 Switch Hardware Overview
EX9214 Switch Hardware Overview on page 3
Installing and Removing EX9204 Switch Hardware Components
Type
Redundant configuration:
Master SF module is hot-pluggable.
Backup SF module is hot-insertable and
hot-removable.
Base configuration:
You must disable the switch before
removing any SF module. See
Host Subsystem Offline in an EX9200
Switch" on page
See EX9204 Switch Configurations, EX9208
Switch Configurations, and
Configurations" on page
Hot-insertable and hot-removable. We
recommend that you take the line cards
offline before removing them. See
a Line Card from an EX9200 Switch" on
page 212.
Hot-insertable and hot-removable.
for the Junos OS
Copyright © 2015, Juniper Networks, Inc.
"Taking the
194.
"EX9214 Switch
7.
"Removing
. Failure