Juniper EX9214 Hardware Manual page 186

EX9214 Switch Hardware Guide
Related
Documentation
162
CAUTION: Do not bend fiber-optic cables beyond their minimum bend
radius. An arc smaller than a few inches in diameter can damage the cables
and cause problems that are difficult to diagnose.
Do not let fiber-optic cables hang free from the connector. Do not allow
fastened loops of cables to dangle, which stresses the cables at the
fastening point.
Disconnecting a Fiber-Optic Cable from a Switch on page 224
Installing a Transceiver in an EX Series Switch on page 215
Maintaining Fiber-Optic Cables in Switches on page 225
Pluggable Transceivers Supported on EX Series Switches
Installing a Transceiver in an OCX1100 Switch
Pluggable Transceivers Supported on OCX1100 Switches
Copyright © 2015, Juniper Networks, Inc.