Juniper EX9214 Hardware Manual page 134

EX9214 Switch Hardware Guide
Related
Documentation
110
Table 46: Optical Interface Support for CFP Transceivers in EX9200
Switches (continued)
Ethernet Standard
100GBASE-LR4
Installing a Transceiver in an EX Series Switch on page 215
Removing a Transceiver from a Switch on page 217
EX9200-2C-8XS Line Card on page 50
EX9200-32XS Line Card on page 54
Specification
Model number
Optical interface
Rate
Standard
Transmitter wavelength per lane
Average launch power per lane
Maximum launch power
Average receive power per lane
Receiver saturation per lane
Receiver sensitivity per lane
Fiber type
Core/Cladding size
Distance
DOM support
Software required
Value
CFP-GEN2-100GBASE-LR4
Single-mode
100 Gbps
IEEE 802.3ba-2010
1294.53 nm through
1296.59 nm
1299.02 nm through
1301.09 nm
1303.54 nm through
1305.63 nm
1308.09 nm through
1310.19 nm
–4.3 dBm through 4.5 dBm
10.5 dBm
–10.6 dBm through 4.5 dBm
4.5 dBm
–10.6 dBm
SMF
9/125 µm
6.2 miles (10 km)
Available
Junos OS for EX Series
switches, Release 13.2R1 or
later
Copyright © 2015, Juniper Networks, Inc.