♦
Precaution when Mounting the Auto Cutter (Optional)
•
When mounting the auto cutter on the auto cutter plate, fit the bosses into the corresponding
holes for positioning.
•
Route the auto cutter cable as shown in the figure and tie down the cable with the cable tie.
♦
Precaution when Mounting the Auto Cutter Plate
•
When mounting the auto cutter plate on the platen chassis, fit the bosses into the corresponding
holes for positioning.
Auto cutter (optional)
*
With the standard model, a
dummy cutter is attached.
Auto cutter plate
Platen chassis
Auto cutter (optional)
*
With the standard model, a
dummy cutter is attached.
*
The above figure shows a standard model.
Holes for bosses
Bosses
Auto cutter cable (optional)
3-36
CD-S500 Series
Bosses
Holes for bosses
Cable tie
Fit in the notch.