♦
Precaution when Mounting the Lower Blade (Optional)
•
When mounting the lower blade on the cutter plate, keep the orientation confirmation hole on
the lower blade on the side of lever R and the chamfered corner of the lower blade on the auto
cutter side.
•
When mounting the lower blade on the cutter plate, fit the boss into the corresponding hole for
positioning.
Orientation confirmation hole
Lever R
Manual cutter blade
Chamfered corner
Lower blade (optional)
Orientation confirmation hole
3-21
CD-S500 Series
Boss and hole for boss
Boss and hole for boss
(oblong hole)