♦
Removing the Rewinder Case (For Rewinder Model Only)
1) Remove screws A (4 pcs.) and screws B (2 pcs.), and remove the rewinder case from the base
frame.
*
Pull the sides of the rewinder case outwards to disengage the bosses for positioning when
removing the rewinder case.
Base frame
Bosses
Screw A
Binding head screw M3 × 5
GND sheet
*
The above figure shows a rewinder model.
♦
Precaution when Mounting the Rewinder Case
•
When mounting the rewinder case on the base frame, fit the hook on paper holder 3 into the slot
on the rewinder case and fit the bosses into the corresponding holes.
•
Tighten the rewinder case together with the GND sheet.
Paper holder 3
Holes for bosses
3-9
CD-S500 Series
Hook
Rewinder case
Screw B
Binding head screw
M3 × 8 (P TITE)
Slot