Busy Condition Check Mode - Citizen CD-S500 Series Service Manual

6-7-1

Busy Condition Check Mode

If the front cover is opened and then closed while POWER LED is flashing, POWER LED stops
flashing and remains lit. After printing from the busy condition to the PAPER WIDTH setting, the
printer stands by for the next key operation.
Operation Method
Pressing FEED switch (less than 2 seconds):
The setting is changed. The present set value is changed and the same item is reprinted.
(Press FEED switch, and when the buzzer sounds once, release it.)
Pressing FEED switch continuously (2 seconds or more):
Moves to the next item. It prints the present set value of the next item.
(Press FEED switch, and when the buzzer sounds three times, release it.)
Opening/Closing the front cover:
The setting value is saved to FROM. When "INITIALIZED" is set to YES, the item value and
the software switch setting is initialized, and then the following cutting operation is executed.
After that, the printer goes to the normal power-on status through POWER ON RESET
operation.
<Cutting operation>
The partial cut is executed at the current position and the paper feeds for 1 inch. Then, full cut
is executed.
* FEED switch after the last item printing works in the same manner as opening the front cover.
6-17
CD-S500 Series