Removing The Sa Front Cover Switch; Removing The Main Pcb; Precaution When Mounting The Sa Front Cover Switch; Precaution When Mounting The Main Pcb - Citizen CD-S500 Series Service Manual

♦

Removing the SA Front Cover Switch

1) Remove screw A (1 pc.), and remove the SA front cover switch from the base frame.
♦

Removing the Main PCB

1) Remove screws B (4 pcs.), and remove the main PCB from the base frame.
Power switch
Slot
SA front cover switch
Screw A
Screw M1.7 × 6 (#0)
* The above figure shows a standard model.
♦

Precaution when Mounting the SA Front Cover Switch

• When mounting the SA front cover switch on the base frame, fit the boss into the
corresponding hole for positioning.
♦

Precaution when Mounting the Main PCB

• Check that the power switch securely fits into the slot on the base frame.
Hole for boss
Boss
3-19
CD-S500 Series
Screw B
Binding head screw M3 × 5
Main PCB
Base frame