3-11-2
Disassembly and Assembly of Rewinder Model
The disassembly procedure is explained mainly. When assembling the parts, follow the disassembly
procedure in reverse.
♦
Removing the Auto Cutter
1) Remove screws A (2 pcs.), and remove the auto cutter from the cutter chassis.
*
Use the positioning release slots (2 positions) and disengage the auto cutter when
removing the auto cutter.
*
Cut the cable tie of the auto cutter cables and remove the auto cutter.
♦
Removing Armature Switch 1
1) Remove screw B (1 pc.), and remove armature switch 1 from the cutter chassis.
Screw B
Binding head screw M2 × 4
Armature switch 1
Cutter chassis
*
The above figure shows a rewinder model.
Auto cutter
Positioning release slot
3-37
CD-S500 Series
Cable tie
Auto cutter cable
Screw A
Pan head screw M3 × 5 (S TITE)