Error Indication - Citizen CD-S500 Series Service Manual

6-4

Error Indication

Errors are indicated by a combination of POWER, P.OUT, and ERROR LEDs.
(Each and
Type of Error
(1) Paper end
Paper near
(2)
end
Rear/front
(3)
cover open
(4) Head hot
(5) HP abnormal
Black mark
(6)
abnormal
Cutter abnormal
(7)
position detection
Hardware
abnormal
(8)
RAM readwrite
Hardware
abnormal
(9)
FROM write
(1
24V abnormal
0)
* No RS232C communication error detection is performed.
represents 300 ms.)
LED Indication
POWER
P.OUT
ERROR
POWER
P.OUT
ERROR
POWER
Depends on the status
P.OUT
ERROR
POWER
P.OUT Depends on the status
ERROR
POWER
P.OUT
ERROR
POWER
P.OUT
ERROR
POWER
P.OUT
ERROR
POWER
P.OUT
ERROR
POWER
P.OUT
ERROR
POWER
P.OUT
ERROR
6-6
CD-S500 Series
Operation and Restoration Method
Printing stops and the printer goes offline.
Replace the paper and close the cover to
return the printer online.
Paper end can be disabled by setting ESC c
4.
When PAPER NEAREND of the soft switch
is enabled, printing continues after PE,
FAULT is output. When it is disabled, the
LEDs keep flashing and printing continues to
the paper end.
During printing, printing is immediately
stopped and the printer goes offline.
Close the cover to return the printer online.
Cooling starts.
After the temperature has fallen, the printer
is automatically restored and printing
restarts.
The printer goes offline. Remove the paper
jam or other problem and press FEED switch
to restore the printer. The printer returns to
online status after initial operation.
The printer goes offline. Remove the paper
jam or other problem and press FEED switch
to restore the printer. The printer returns to
online status after initial operation.
The printer goes offline. Remove the paper
jam or other problem and press FEED switch
to restore the printer. The printer returns to
online status after initial operation.
When the power is on, it means that a
hardware error, such as RAM check,
occurred.
The printer goes offline, and then an error is
indicated. Restoration impossible.
FROM writing error.
The printer goes offline, and then an error is
indicated. Restoration impossible.
24V voltage abnormal.
The printer goes offline, and then an error is
indicated. Restoration impossible.
: Lit, : Off