Connecting Drawer Kick-Out Connector; Opening/Closing The Auto Cutter (Idp3421/3423) - Citizen iDP3420 User Manual

4.4 Connecting the Drawer Kick-Out Connector
1. Turn off the power.
2. Check the top and bottom of the drawer kick-out cable connector and connect it to the drawer kick-out
connector located on the back of the printer.
3. Screw the grounding cable of the drawer to the grounding terminal of the printer.
CAUTION:
Connect only the prescribed drawer (Solenoid) to the drawer kick -out connector.
Drawer Kick-Out Cable Connector
4.5

Opening/Closing the Auto Cutter (iDP3421/3423)

The auto cutter is secured by a magnet.
open/close it.
CAUTION:
When closing the auto cutter, do so gently not to give a shock.
Auto Cutter
Drawer Kick-Out Connector
Earth Terminal
Hold the auto cutter and turn it in the arrow-indicated direction to
11
iDP3420/3421/3423 User's Manual
CITIZEN