♦
Removing the Head Cover
1) Remove screws A (2 pcs.), and remove the head cover from the main frame.
*
Unhook the projections (2 positions) of the head cover when removing the head cover.
♦
Removing the SA Print Head
1) Remove screws B (2 pcs.), and remove the SA print head from the carriage.
*
Remove the print head FPC from the connector.
♦
Removing the Ribbon Mask
1) Remove screw C (1 pc.), and remove the ribbon mask from the carriage.
Screw A
Binding head screw M2 × 4
Head cover
Screw C
Screw M1.7 × 4 (#0) (B TITE)
Ribbon mask
SA print head
Projections
Main frame
3-22
CD-S500 Series
Screw B
Binding head screw M3 × 8 (P TITE)
Print head FPC
Connector
Carriage