Rear Connectors AC adapter type Parallel (IEEE1284) interface Serial (RS232C) interface Built-in AC adapter type 1 Interface connector It is connected to either a serial (RS232C) or parallel (IEEE1284) interface cable. * A USB interface replaced by a serial or parallel interface will be available as a factory option.
Page 36
<Soft-Switch Setting> Press Feed Change PARM. Press Feed For 2S Next Item F.Cover Open/Close Save & Exit <Soft Control-SW>-------------------- Command Type –EPSON Number of Col. –40/33 –7 × 9 Font Select Paper Plies –OFF Paper End –ENB Paper Near-End –ENB Slashed Zero –OFF Print Direct.
Opening then closing the front cover changes the ± of the adjusted value. Pressing and holding the FEED Switch (2 seconds or more): The present value is saved and the printer enters normal power on status. Adjustment range: –999 to +999 Initial value: +000...