3-11
Disassembly and Assembly of the Auto Cutter
3-11-1
Disassembly and Assembly of Standard Model
The disassembly procedure is explained mainly. When assembling the parts, follow the disassembly
procedure in reverse.
♦
Removing the Auto Cutter (Optional)
1) Remove screws A (2 pcs.), and remove the auto cutter from the auto cutter plate.
*
Use the positioning release slots (2 positions) and disengage the auto cutter when
removing the auto cutter.
*
Cut the cable tie for the auto cutter cables and remove the auto cutter.
*
With the standard model, a dummy cutter is attached to the auto cutter plate. If it is
necessary to remove the dummy cutter, remove it in the same way as the auto cutter.
♦
Removing the Auto Cutter Plate
1) Remove screws B (2 pcs.), and remove the auto cutter plate from the platen chassis.
*
Use the positioning release slots (2 positions) and disengage the auto cutter plate when
removing the auto cutter plate.
Auto cutter plate
Platen chassis
*
The above figure shows a standard model.
Positioning release slot
Auto cutter (optional)
*
With the standard model, a
dummy cutter is attached.
3-35
CD-S500 Series
Positioning release slot
Cable tie
Auto cutter cable (optional)
Screw A
Pan head screw M3 × 5 (S TITE)
Screw B
Pan head screw M3 × 5 (S TITE)