Using The Web Interface - Polycom ViewStation EX Administrator's Manual

Administrator's Guide for ViewStation EX, ViewStation FX, and VS4000

Using the Web Interface

5-2
You can use the web interface to perform most of the calling and configuration
tasks you can perform on the local system.
To configure your browser to use the web interface:
1. Be sure that your web browser uses one of these software versions:
Microsoft Internet Explorer 5.5 or later.
•
• Netscape 6.0 or later.
2. Configure these settings:
Allow cookies
Force pages to reload on every visit to
a page
Set cache to compare page in cache
with page on network every time
Enable Javascript
To access the system using the web interface:
1. On a PC, open a web browser.
2. In the browser address line, enter the system's IP address, for example,
http://255.255.255.255, to go to the system's web interface.
Enter admin as the user name, and the admin password, if a password has
3.
been established.
You can use the web interface to configure all of the system settings except the remote
management settings. For security reasons, these settings must be configured on the local
system by an administrator.
Internet
Explorer Netscape
Enabled Enabled
Enabled N/A
N/A Enabled
N/A Enabled
www.polycom.com/videodocumentation