Setting System Time - Polycom ViewStation EX Administrator's Manual

Administrator's Guide for ViewStation EX, ViewStation FX, and VS4000

Setting System Time

4-24
You can set the system time to use local date/time when reporting call data.
1. Go to System Info > Admin Setup > LAN/H.323 > NTP Setup.
2. Configure these settings:
Setting
Time Server
Server IP Address
Daylight Savings
Time
Time Difference from
GMT
Description
Specifies connection to a time server for automatic system time
settings. To specify your own time server, select Manual and
enter the DNS name or IP address in the field below.
Specify your own time server, if desired.
Specifies that the system time is presently adjusting for Daylight
Savings Time.
Specifies the time difference between GMT (Greenwich Mean
Time) and your location.
www.polycom.com/videodocumentation