Add Did Trunks; Requirements; Installation; Add Tie Trunks - Avaya CMC1 Installation, Upgrades And Additions

Add DID Trunks

Requirements

Two circuit packs presently support Direct Inward Dial (DID) trunks: the TN753 DID trunk circuit
pack and the TN797 Combination Circuit pack. Each can support up to 8 DID trunks.

Installation

To add DID trunks:
1. Determine the port assignment of the trunk from the Trunk Group form.
EXAMPLE:
2. Install a DID Trunk circuit pack in assigned carrier slot (if an additional circuit pack is
required).
3. Administer forms listed under "DID Trunk Group" in Administrator's Guide for Avaya
Communication Manager.

Add Tie Trunks

Requirements
Each tie trunk connects to 1 port of a 4-port tie trunk circuit pack or to an assortment of
international tie trunk circuit packs.
3 A
Cabinet (Port Carrier
Network)
Add DID Trunks
07 01
Slot Port
Number Number
Issue 10 June 2005 253