Adding or Removing Hardware
Add CO, FX, WATS, and PCOL
Add CO, FX, WATS, and PCOL
Requirements
Each Central Office (CO), Foreign Exchange (FX), Personal Central Office Line (PCOL), or Wide Area
Telecommunications Service (WATS) trunk connects to 1 port of either an 8-port TN747B or to 1 of
several CO trunk circuit packs.
Installation
1
Install a TN747B or a CO Trunk circuit pack in the assigned carrier slot (if an additional circuit
pack is required).
2
Administer the forms listed under CO, FX, WATS, or PCOL Trunk Group in Administrator's
Guide for Avaya Communication Manager.
3
Determine the port assignment of the trunk from the Trunk Group form.
EXAMPLE:
Add DID Trunks
Requirements
Two circuit packs presently support Direct Inward Dial (DID) trunks: the TN753 DID trunk circuit pack
and the TN797 Combination Circuit pack. Each can support up to 8 DID trunks.
Installation
1
Determine the port assignment of the trunk from the Trunk Group form.
EXAMPLE:
2
Install a DID Trunk circuit pack in assigned carrier slot (if an additional circuit pack is required).
3
Administer forms listed under "DID Trunk Group" in Administrator's Guide for Avaya
Communication Manager.
214
3
A
Cabinet (Port
Carrier
Network)
3
A
Cabinet (Port
Carrier
Network)
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
07
01
Slot
Port
Number
Number
07
01
Slot
Port
Number
Number
June 2004