Installing The Tn2302Ap Ip Media Processor - Avaya CMC1 Installation, Upgrades And Additions

Figure 91: TN2302AP Amphenol Adapter
Figure notes:
1. Amphenol connector to backplane
connector corresponding to TN2302AP
slot

Installing the TN2302AP IP Media Processor

To install a TN2302AP IP Media Processor, you must install
One or more TN2302AP circuit pack(s).
One or more TN799DP circuit pack(s) (a TN799DP can support more than one
TN2302AP).
An IP Media Processor adapter.
Connect the cables for TN799DP
To connect the cables for TN799DP:
1. Determine into which port slots you are putting the TN799DP C-LAN circuit packs.
From the rear of the cabinet:
2. Connect a 259A connector to the backplane connector corresponding to each TN799DP
slot.
3. Connect one end of each DW8 cable to each 259A connector.
3
1
addfipm2 KLC 083000
2
2. To Ethernet
3. 9-pin connector for maintenance
Issue 10 June 2005
Add IP Solutions
281