Add CO, FX, WATS, and PCOL
Add CO, FX, WATS, and PCOL
Requirements
Each Central Office (CO), Foreign Exchange (FX), Personal Central Office Line
(PCOL), or Wide Area Telecommunications Service (WATS) trunk connects to 1
port of either an 8-port TN747B or to 1 of several CO trunk circuit packs.
Installation
1. Install a TN747B or a CO Trunk circuit pack in the assigned carrier slot (if
an additional circuit pack is required).
2. Administer the forms listed under CO, FX, WATS, or PCOL Trunk Group in
Administrator's Guide for Avaya Communication Manager.
3. Determine the port assignment of the trunk from the Trunk Group form.
EXAMPLE:
Add DID Trunks
Requirements
Two circuit packs presently support Direct Inward Dial (DID) trunks: the TN753
DID trunk circuit pack and the TN797 Combination Circuit pack. Each can support
up to 8 DID trunks.
Installation
1. Determine the port assignment of the trunk from the Trunk Group form.
EXAMPLE:
2. Install a DID Trunk circuit pack in assigned carrier slot (if an additional
circuit pack is required).
3. Administer forms listed under "DID Trunk Group" in Administrator's Guide
for Avaya Communication Manager.
555-233-118
3
A
Cabinet (Port
Carrier
Network)
3
A
Cabinet (Port
Carrier
Network)
07
01
Slot
Port
Number
Number
07
01
Slot
Port
Number
Number
Issue 7 November 2003
5-23