Add Ds1 Tie And Ops; Service Interruption - Avaya CMC1 Installation, Upgrades And Additions

Table 55: Tie Trunk Option-Switch Settings and Administration
Installation Situation
Circumstance
Collocated
Inter-Building
Collocated

Add DS1 Tie and OPS

The TN2313AP DS1 Tie Trunk and TN767B (or later) DS1 Interface circuit packs provide
connections to a 1.544 Mbps DS1 facility (T1) as 24 independent
64 Kbps trunks.
The TN2313AP DS1 Tie Trunk, TN767B (or later) DS1 Interface, and TN464HP DS1 Interface
circuit packs provide connections to a 2.048 Mbps DS1 facility (E1) as 32 independent 64-kbps
trunks.

Service Interruption

To add DS1 tie and OPS trunks:
1. Since the addition of DS1 tie-trunk service may require a service interruption, notify the
customer in advance as to when the addition will occur.
2. For information about administering DS1 Tie Trunks, refer to Administrator's Guide for
Avaya Communication Manager.
Preferred Signaling
Format
To System
Avaya E&M Type
CMC1 1
Media
Gateway
Compatible
Avaya Protected
CMC1 Type 1
Media
Gateway
Compatible
Net E&M Type
Integrated 1
Standard
E&M/SMPLX
Switch
Far-End
E&M Type E&M
1
Standard
Protected E&M
Type 1
Standard
Plus
Protection
Unit
Any PBX E&M
Add DS1 Tie and OPS
Prot/Unprot Administered
Switch Port
Unprotected Type 1
Compatible
Protected Type 1
Compatible
Unprotected Type 1
Issue 10 June 2005 255