Fuses - Toro Reelmaster 2000-D Service Manual

Fuses

The fuse block is located on the back of the instrument
panel (Fig. 26).
Identification, Function, and Wiring
The fuses are held in the fuse block. Use Figure 27 to
identify each individual fuse and its correct amperage.
Each fuse holder has the following functions and wire
connected to it.
Fuse 1 (15 Amp)
A. Supplies power to ignition switch terminal B.
B. Has orange wire and red wire (battery).
Fuse 2 (option)
A. Supplies power to optional lights.
B. Has blue wire and red wire.
C. DO NOT use fuse greater than 15 amp.
Fuse 3 (10 Amp)
A. Supplies power from ignition switch terminal S.
B. Has violet wire and tan wire.
Fuse 4 (10 Amp)
A. Supplies power from ignition switch terminal I.
B. Has pink wire and yellow wire.
Testing
Remove fuses from the fuse block for testing. Fuse
should have continuity between fuse terminals.
Reelmaster 2000–D
1
2
3
4
Page 5 – 23
1
Figure 26
1. Fuse block
15A
MAXIMUM
15 AMP
FUSE
10A
10A
Figure 27
Electrical System