H. On backlap valve, turn knob counterclockwise so
o
the arrow is 90
with the back of the manifold body.
Simultaneously tighten upper jam nut and turn knob
so it is tight and the arrow is pointing 45
line with the indicator plate.
I. On reel speed control valve, turn knob counter-
clockwise until the arrow points at the number "5". Si-
multaneously tighten upper jam nut and turn knob so
it is tight and the arrow is pointing at the number "1"
on the locating plate.
11. After reassembly, if problems still exist, remove valve
and clean again or replace valve.
Hydraulic System
o
to the right in
Page 4 – 62
Reelmaster 2000–D