Special Tools; Special Tools - Toro Reelmaster 2000-D Service Manual

Special Tools

Order Special Tools from your Toro Distributor. Some
tools may have been supplied with your machine or are
available as Toro parts.
Gauge Bar Assembly
Use gauge bar to verify height--of--cut and bedknife atti-
tude.
Toro Part Number: 98-1852
Handle Assembly
For applying lapping compound to cutting units while
keeping hands a safe distance from the rotating reel.
Toro Part Number: TOR299100
Bedknife Screw Tool
This screwdriver type bit is made to fit Toro bedknife at-
taching screws. Use this bit with a torque wrench to se-
cure the bedknife to the bedbar.
IMPORTANT: Do not use an air or manual impact
wrench with this tool.
Toro Part Number: TOR510880
Cutting Units Page 7 - - 4 Rev. A
Figure 2
Figure 3
Figure 4
Reelmaster 2000--D