Adjusting The Front Wheel Static Balance - Yamaha 2009 Diversion XJ6S Service Manual

4
2
4. Connect:
Front wheel sensor coupler "1"
G
1
5. Check:
Front wheel sensor installation
G
Check if the wheel sensor housing is installed
properly.
Refer to "MAINTENANCE OF THE FRONT
WHEEL SENSOR AND SENSOR ROTOR"
on page 4-9.
EAS21970
ADJUSTING THE FRONT WHEEL STATIC
BALANCE
TIP
After replacing the tire, wheel or both, the front
G
wheel static balance should be adjusted.
Adjust the front wheel static balance with the
G
brake disc installed.
1. Remove:
Balancing weight(s)
G
2. Find:
Front wheel's heavy spot
G
TIP
Place the front wheel on a suitable balancing
stand.
MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
a. Spin the front wheel.
3
b. When the front wheel stops, put an "X
at the bottom of the wheel.
1
c. Turn the front wheel 90° so that the "X
is positioned as shown.
d. Release the front wheel.
e. When the wheel stops, put an "X
the bottom of the wheel.
f. Repeat steps (d) through (f) several times un-
til all the marks come to rest at the same spot.
g. The spot where all the marks come to rest is
the front wheel's heavy spot "X".
LLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL
3. Adjust:
Front wheel static balance
G
MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
a. Install a balancing weight "1" onto the rim ex-
actly opposite the heavy spot "X".
4-12
FRONT WHEEL
" mark
1
" mark
1
" mark at
2