[C-5] Diagnosis Using The Fault Codes - Yamaha 2009 Diversion XJ6S Service Manual

defective. Replace the meter assembly.
EAS4B56022

[C-5] DIAGNOSIS USING THE FAULT CODES

Connect the test coupler adapter to the ABS test coupler, and then turn the main switch to "ON".
Information for the fault codes from the ABS ECU is contained in the following table. Refer to this table
for troubleshooting.
TIP
Record all of the fault codes displayed and inspect the check points.
Fault code table
Fault
code No.
AbS_11* Front wheel sensor signal is not
AbS_25* received properly.
Rear wheel sensor signal is not
AbS_12
received properly.
AbS_13 Incorrect signal from the front wheel
AbS_26 sensor is detected.
AbS_14 Incorrect signal from the rear wheel
AbS_27 sensor is detected.
No continuity in the front wheel sensor
AbS_15
circuit.
No continuity in the rear wheel sensor
AbS_16
circuit.
AbS_17 Missing pulses detected in the front
AbS_45 wheel sensor signal.
AbS_18 Missing pulses detected in the rear
AbS_46 wheel sensor signal.
ABS (ANTI-LOCK BRAKE SYSTEM)
Symptom
8-111
Check point
Installation of the front wheel sensor
G
Front wheel
G
Front wheel sensor housing
G
Front wheel sensor rotor
G
Installation of the rear wheel sensor
G
Rear wheel
G
Rear wheel sensor housing
G
Rear wheel sensor rotor
G
Installation of the front wheel sensor
G
Front wheel
G
Front wheel sensor housing
G
Front wheel sensor rotor
G
Hydraulic unit assembly
G
Installation of the rear wheel sensor
G
Rear wheel
G
Rear wheel sensor housing
G
Rear wheel sensor rotor
G
Hydraulic unit assembly
G
Continuity of the front wheel sensor cir-
G
cuit
Wire harness (ABS circuit)
G
Connection of the front wheel sensor
G
coupler and ABS ECU coupler
Front wheel sensor
G
Continuity of the rear wheel sensor circuit
G
Wire harness (ABS circuit)
G
Connection of the rear wheel sensor cou-
G
pler and ABS ECU coupler
Rear wheel sensor
G
Front wheel sensor rotor
G
Front wheel sensor housing
G
Front wheel
G
Rear wheel sensor rotor
G
Rear wheel sensor housing
G
Rear wheel
G