Gusset bolt
30 Nm (3.0 m·kgf, 22 ft·lbf)
Left side panel
G
Refer to "GENERAL CHASSIS" on page 4-1.
EWA4S81001
WARNING
After adjusting the throttle cable free play,
start the engine and turn the handlebar to the
right and to the left to ensure that this does
not cause the engine idling speed to change.
EAS21760
CHECKING AND CHARGING THE BATTERY
Refer to "ELECTRICAL COMPONENTS" on
page 8-145.
EAS21770
CHECKING THE FUSES
Refer to "ELECTRICAL COMPONENTS" on
page 8-145.
EAS21810
ADJUSTING THE HEADLIGHT BEAMS
The following procedure applies to both of the
headlights.
1. Adjust:
Headlight beam (vertically)
G
MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
a. Turn the adjusting screw "1" in direction "a" or
"b".
Direction "a"
Headlight beam is raised.
Direction "b"
Headlight beam is lowered.
1
LLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL
2. Adjust:
Headlight beam (horizontally)
G
MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
a. Turn the adjusting screw "1" in direction "a" or
"b".
Direction "a"
Headlight beam moves to the right.
Direction "b"
Headlight beam moves to the left.
LLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL
EAS21790
REPLACING THE HEADLIGHT BULBS
1. Disconnect:
Headlight coupler "1"
G
2. Remove:
Headlight bulb cover "2"
G
3-31
PERIODIC MAINTENANCE
1
a
b
1
a
b