Yamaha 2009 Diversion XJ6S Service Manual page 97

1. Radiator fan motor relay
2. Relay unit
3. License plate light lead
4. Rear turn signal light leads (left/right)
5. Tail/brake light lead
6. Seat lock cable
7. Turn signal relay
8. Headlight relay
9. Lean angle sensor
10. Fuse box
11. Frame COMP.
12. White tape
13. Wire harness
A. Insert the alarm coupler under the wire harness.
B. Pass the wire harness through the rear fender
notch.
C. Clamp the radiator fan motor relay lead, relay unit
lead and tail lead (wire harness). They may be
clamped in any direction.
D. Clamp the turn signal relay lead, relay unit lead
and seat lock cable. They may be clamped in any
direction.
E. Pass the wire harness and seat lock cable
through the rear fender notch.
F. Fasten the tail/brake light lead tightly with a plas-
tic tie on the white taped area.
2-52
CABLE ROUTING