Instrument Functions - Yamaha 2009 Diversion XJ6S Service Manual

EAS20S1001

INSTRUMENT FUNCTIONS

Multi-function meter unit
1 2 3
8 7 6 5
1. Fuel meter
2. Coolant temperature display
3. Speedometer
4. Tachometer
5. Odometer/tripmeter/fuel reserve tripmeter
6. "SELECT" button
7. "RESET" button
8. Clock
EWA20S1001
WARNING
Be sure to stop the vehicle before making
any setting changes to the multi-function
meter unit. Changing settings while riding
can distract the operator and increase the
risk of an accident.
The multi-function meter unit is equipped with
the following:
a speedometer
G
a tachometer
G
an odometer
G
two tripmeters (which show the distance trav-
G
eled since they were last set to zero)
a fuel reserve tripmeter (which shows the dis-
G
tance traveled since the left segment of the fuel
meter started flashing)
a clock
G
a fuel meter
G
a coolant temperature display
G
a self-diagnosis device
G
TIP
Be sure to turn the key to "ON" before using the
G
"SELECT" and "RESET" buttons.
For the U.K. only: To switch the speedometer
G
and odometer/tripmeter displays between kilo-
meters and miles, press the "SELECT" button
for at least one second.
4
1-4
Tachometer
1. Tachometer
2. Tachometer red zone
The electric tachometer allows the rider to mon-
itor the engine speed and keep it within the ideal
power range.
When the key is turned to "ON", the tachometer
needle will sweep once across the r/min range
and then return to zero r/min in order to test the
electrical circuit.
ECA20S1006
NOTICE
Do not operate the engine in the tachometer
red zone.
Red zone:11666 r/min and above
Clock
1
1. Clock
The clock displays when the key is turned to
"ON". In addition, the clock can be displayed for
10 seconds by pushing the "SELECT" button
when the main switch is in the "OFF", "LOCK" or
" " position.
To set the clock
1. Turn the key to "ON".
2. Push the "SELECT" button and "RESET" but-
ton together for at least two seconds.
3. When the hour digits start flashing, push the
"RESET" button to set the hours.
4. Push the "SELECT" button, and the minute
digits will start flashing.
5. Push the "RESET" button to set the minutes.
6. Push the "SELECT" button and then release
it to start the clock.
FEATURES
1
2
ABS