Ricoh Pro C5210s Operating Instructions Manual

Ricoh Pro C5210s Operating Instructions Manual

Adjustment item menu guide: tcru/oru
Table of Contents

Advertisement

Operating Instructions

Adjustment Item Menu Guide: TCRU/ORU
For safe and correct use, be sure to read the Safety Information in "Read This First" before using the machine.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Pro C5210s and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Ricoh Pro C5210s

  • Page 1: Operating Instructions

    Operating Instructions Adjustment Item Menu Guide: TCRU/ORU For safe and correct use, be sure to read the Safety Information in "Read This First" before using the machine.
  • Page 3: Table Of Contents

    TABLE OF CONTENTS Introduction................................. 3 How to Read This Manual..........................4 Symbols................................4 Disclaimer................................4 Notes................................4 Manuals for This Machine..........................5 Paper Feed Direction of Printed Copies (Side 1/Side 2)................6 1. Adjustment Settings for Skilled Operators Displaying the [Adjustment Settings for Skilled Operators] Button..............9 Accessing Adjustment Settings for Skilled Operators..................12 Layout of Adjustment Settings for Skilled Operators..................
  • Page 4 Backing up Custom Paper Profiles Registered Under the [Edit] Setting..........100 Backing up and Restoring Custom Paper Profiles Using the External Controller's Control Panel..101 4. Details of Menu Items in Advanced Settings Menu Items and Functions..........................103 Setting Values..............................112 Paper Feed Adjustment..........................112 Paper Delivery Adjustment........................113 Image Position/Scaling Adjustment......................113 Line Speed Adjustment..........................119...
  • Page 5: Introduction

    Introduction This manual contains detailed instructions and notes on the operation and use of this machine. For your safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy place for quick reference.
  • Page 6: How To Read This Manual

    How to Read This Manual Symbols This manual uses the following symbols: Indicates points to pay attention to when using the machine, and explanations of likely causes of paper misfeeds, damage to originals, or loss of data. Be sure to read these explanations. Indicates supplementary explanations of the machine’s functions, and instructions on resolving user errors.
  • Page 7: Manuals For This Machine

    Manuals for This Machine The following manuals are for skilled operators only. Adjustment Item Menu Guide This manual explains the items in Adjustment Settings for Skilled Operators and the advanced settings for custom paper adjustment in "System Settings". Replacement Guide This manual explains how to replace the machine's components.
  • Page 8: Paper Feed Direction Of Printed Copies (Side 1/Side 2)

    Paper Feed Direction of Printed Copies (Side 1/Side 2) Depending on the setting, printed copies are fed as follows: Side 1 is the surface of the paper printed during one-sided printing, or the surface of the first print during duplex printing. Side 2 is the surface of the paper printed on the back side of Side 1 during duplex printing.
  • Page 9 Duplex printing: Printed side face down DSM010 A. Side 1 B. Paper feed direction of Side 1 C. Side 2 D. Paper feed direction of Side 2 Duplex printing: Printed side face up DWM001 A. Side 1 B. Paper feed direction of Side 1 C.
  • Page 11: Adjustment Settings For Skilled Operators

    1. Adjustment Settings for Skilled Operators Displaying the [Adjustment Settings for Skilled Operators] Button To use the Adjustment Settings for Skilled Operators, you must first configure your machine's Administrator Authentication Management setting. Display the initial settings screen. • When using the standard operation panel 1.
  • Page 12 1. Adjustment Settings for Skilled Operators Press [Administrator Tools]. Press [ Next]. Press [Administrator Authentication Management]. Press [Machine Management].
  • Page 13 Displaying the [Adjustment Settings for Skilled Operators] Button Select [On] for "Admin. Authentication". Press [OK]. Press [Exit]. The [Adjustment Settings for Skilled Operators] button appears.
  • Page 14: Accessing Adjustment Settings For Skilled Operators

    1. Adjustment Settings for Skilled Operators Accessing Adjustment Settings for Skilled Operators Press [Adjustment Settings for Skilled Operators]. Press [Login]. Enter your login user name, and then press [OK]. If you are logging on as the administrator for the first time, enter "admin".
  • Page 15 Accessing Adjustment Settings for Skilled Operators Enter your login password, and then press [OK]. The Adjustment Settings for Skilled Operators appears.
  • Page 16: Layout Of Adjustment Settings For Skilled Operators

    1. Adjustment Settings for Skilled Operators Layout of Adjustment Settings for Skilled Operators This section explains how to use Adjustment Settings for Skilled Operators. CWH201 1. Adjustment items are displayed in this area. Select the setting you want to specify or change. 2.
  • Page 17: Features Of The Displayed Items And Setting Operations

    Features of the Displayed Items and Setting Operations Features of the Displayed Items and Setting Operations The following operations are available for each adjustment item: • Value setting • Item setting • Executing • Display only Value setting Press [+] to increase the value, or [-] to decrease. You can also use the number keys to enter numbers.
  • Page 18 1. Adjustment Settings for Skilled Operators Display only You can check the setting for the selected item.
  • Page 19: Notes On How Adjustment Settings Are Applied To Printed Copies

    Notes on How Adjustment Settings are Applied to Printed Copies Notes on How Adjustment Settings are Applied to Printed Copies The adjustment settings are applied to printed copies according to the settings specified for each paper tray, paper size, and paper weight. Depending on the adjustment setting, the same settings specified under different categories may be applied to printed copies concurrently.
  • Page 20 1. Adjustment Settings for Skilled Operators The settings are applied only to printed copies of each paper size. • For information about the paper tray, paper thickness, and tray paper size settings that can be specified for a particular function, see the manual for the relevant function.
  • Page 21: Details Of Menu Items In Adjustment Settings For Skilled Operators

    2. Details of Menu Items in Adjustment Settings for Skilled Operators Menu Items and Functions [Machine: Image Position] For details about the following items, see page 27 "[Machine: Image Position]". Item Description 0101 [Image Position: With Adjust the horizontal position of the print image. Feed] 0102 [Image Position: Across...
  • Page 22 2. Details of Menu Items in Adjustment Settings for Skilled Operators Item Description 0207 [Fusing Temperature on Adjust the set fusing temperature according to the Standby] machine status. 0208 [Auto Color Selection Specify the number of sheets the machine prints in full Setting] color mode before switching to black-and-white mode when printing a job which involves full color printing...
  • Page 23 Menu Items and Functions Item Description 0140 [Buffer Pass Unit Fan Select when the buffer pass unit fan is to operate. Activation Setting] [Machine: Maintenance] For details about the following items, see page 42 "[Machine: Maintenance]". Item Description 0301 [Execute Cleaning Initial Initialize the cleaning unit for the photoconductor unit Setting] (PCU).
  • Page 24 2. Details of Menu Items in Adjustment Settings for Skilled Operators Item Description 0704 [Switch Print Screen] Switch to the print screen if you want to output an alignment pattern to check image misalignment with the color controller connected. [Preprocessing: LCT] For details about the following items, see page 46 "[Preprocessing: LCT]".
  • Page 25 Menu Items and Functions Item Description 0407 [Correct Punch Skew] Adjust skew correction for punching in order to reduce punch skew due to difference in size, thickness, and paper curl when using Finisher SR4120 or Finisher SR4130. 0408 [Punch Skew Correction] Disable punch skew correction function if jams or edgefolding problems occur particularly when punching lightweight paper using Finisher SR4120 or Finisher...
  • Page 26 2. Details of Menu Items in Adjustment Settings for Skilled Operators Item Description 0803 [Staple Position: With Adjust the horizontal position of the staples when using Feed] Finisher SR5070 or Booklet Finisher SR5080. 0804 [Paper Alignment for Adjust the width of the staple jogger for edge stapling Stapling: Across Feed] when using Finisher SR5070 or Booklet Finisher SR5080.
  • Page 27 Menu Items and Functions Item Description 0815 [Output Trail Edge Press Specify whether or not to press down the trailing edge of Setting] the paper when it is delivered to the finisher shift tray of Finisher SR5070 or Booklet Finisher SR5080. 0816 [Output Fan Setting] Specify how the shift tray fan moves when using Finisher...
  • Page 28 2. Details of Menu Items in Adjustment Settings for Skilled Operators Item Description 0601 [Half Fold Position: Multi- Adjust the fold position of half folded sheets when using sheet Fold] the multi-folding unit. 0602 [Letter Fold-out Position 1: Adjust the fold position for the bottom segment of letter Multi-sheet Fold] fold-out sheets when using the multi-folding unit.
  • Page 29: Setting Values

    Setting Values Setting Values [Machine: Image Position] 0101: [Image Position: With Feed] Adjust the horizontal position of the print image. You can make this adjustment to Side 1 on an individual tray basis, but not to Side 2. Side 1 Paper feed direction Default Left...
  • Page 30 2. Details of Menu Items in Adjustment Settings for Skilled Operators Default Max. Min. Setting Items Step Unit Value Value Value [Tray 1] -9.0 [Tray 2] [Tray 3] [Bypass Tray] [2 Sided] [LCT] [Paper Weight 1] [Paper Weight 2] [Paper Weight 3] [Paper Weight 4] [Paper Weight 5] [Paper Weight 6]...
  • Page 31 Setting Values Leading-edge margin Trailing-edge margin Paper feed direction CEZ586 • For printing from a paper tray with custom paper, the values specified in [Adj Image Position of Side1 With Feed] and [Adj Image Position of Side2 With Feed] within [Advanced Setting] for the custom paper will be added.
  • Page 32 2. Details of Menu Items in Adjustment Settings for Skilled Operators Side 2 Paper feed direction Left Right Default (Trailing edge) (Leading edge) Bottom CEZ014 Press [+] to shift the image to the top. Press [−] to shift the image to the bottom.
  • Page 33 Setting Values Default Max. Min. Setting Items Step Unit Value Value Value [Tray 1] -4.0 [Tray 2] [Tray 3] [Bypass Tray] [2 Sided] [LCT] [Paper Weight 1] [Paper Weight 2] [Paper Weight 3] [Paper Weight 4] [Paper Weight 5] [Paper Weight 6] [Paper Weight 7] [Paper Weight 8] [Paper Weight 9]...
  • Page 34 2. Details of Menu Items in Adjustment Settings for Skilled Operators By increasing the mask width, you can increase the paper margin at the leading edge, trailing edge, left edge, or right edge of the paper. If misfeeding of paper occurs when using loose paper such as thin or coated paper, increase the mask width.
  • Page 35: [Machine: Image Quality]

    Setting Values [Machine: Image Quality] 0201: [Adjust Image Density/ DEMS] Execute image density control manually. DEMS can reduce the variations in thickness that occur in the intervals between the photoconductor and development sleeve operations. The machine adjusts the image density. This operation takes about 30 seconds during which a message appears on the control panel.
  • Page 36 2. Details of Menu Items in Adjustment Settings for Skilled Operators 0203: [Maximum Image Density] Specify the adhesion of toner to the drum surface and intermediate transfer belt when image density adjustment is executed. If color reproduction is affected by the toner's color intensity difference, adjust the toner adhesion. After specifying this setting, execute [Adjust Image Density/DEMS].
  • Page 37 Setting Values • Adjusting this setting may cause distorted text and blurred lines. Check the printed images while making the adjustment. 0205: [Density Difference: Across Feed] Adjust the image density difference between the top and bottom of the image. To make the adjusted settings take effect, turn the main power off and then back on. Press [+] to increase the density at the bottom (and decrease it at the top) and press [−] to decrease the density at the bottom (and increase it at the top).
  • Page 38 2. Details of Menu Items in Adjustment Settings for Skilled Operators In "Temperature on Standby Mode", you can specify the fusing temperature in standby mode*. In "Temperature Before Performing a Process", you can specify the fusing temperature applied when the machine is accessed from the control panel or when the machine is receiving print jobs.
  • Page 39 Setting Values In [Special Mode], the replacement cycle of the cleaning unit for the PCU is shorter because of the increased amount of lubricant that is applied. If you reset the counter after replacing the cleaning unit for the PCU, [Special Mode] is reset to its factory setting.
  • Page 40 2. Details of Menu Items in Adjustment Settings for Skilled Operators Default Max. Min. Setting Items Step Unit Value Value Value [Coefficient of Quadratic Function: 30000 -30000 None [Coefficient of Linear Function: l] [Constant Term: m] *1 Values vary depending on the machine model. If you replace the fusing unit, enter the number shown on the label attached to the new fusing unit.
  • Page 41: [Machine: Paper Feed/ Output]

    Setting Values [Machine: Paper Feed/ Output] 0103: [Registration Gate: Paper Buckle Amount] Adjust the allowable amount of paper buckle when the edge of the paper is pressed against the registration unit. If the paper arching is too small or too large, the image may be misaligned or the paper may become skewed.
  • Page 42 2. Details of Menu Items in Adjustment Settings for Skilled Operators Default Max. Min. Setting Items Step Unit Value Value Value [Paper Weight 5] [Paper Weight 6] [Paper Weight 7] [Paper Weight 8] [Paper Weight 9] *1 The factory-set value is preset. •...
  • Page 43 Setting Values Default Max. Min. Setting Items Step Unit Value Value Value [Bypass Tray: Paper Weight 6] [Bypass Tray: Paper Weight 7] [Bypass Tray: Paper Weight 8] [Bypass Tray: Paper Weight 9] 0130: [Perpendicularity Adjustment] Adjust the vertical skew of the image. Press [+] to skew the image clockwise or [−] to skew it counterclockwise.
  • Page 44: [Machine: Maintenance]

    2. Details of Menu Items in Adjustment Settings for Skilled Operators Setting Items Values Default Value [Buffer Pass Unit Fan Activation Setting] [All Paper Weights] [Weight 4 & Above] [Weight 3 & Above] [Weight 4 & Above] [Weight 5 & Above] [Weight 6 &...
  • Page 45 Setting Values Perform this after replacing the drum unit, cleaning unit for the PCU, charge roller unit, transfer unit, or cleaning unit for intermediate transfer belt. For details about replacing units, see the Replacement Guide. This operation takes one or two minutes. During this operation, a message appears on the control panel. Do not pull out the drawer while the message is being displayed.
  • Page 46 2. Details of Menu Items in Adjustment Settings for Skilled Operators 0306: [Replaceable Parts Counter] Display the counters for replaceable units. 0307: [Target Value for Replaceable Part] Display the values at which replaceable units must be replaced. 0308: [Execute Charge Roller Cleaning] Clean the charge roller unit.
  • Page 47 Setting Values 0702: [Temperature / Humidity outside the Machine] Display the external temperature and humidity. If your service representative requests it, report this information. Setting Items Remarks [Temperature] Value display only. [Humidity] 0703: [Back Up / Restore Custom Paper Data] Back up and restore custom paper profiles.
  • Page 48: [Preprocessing: Lct]

    2. Details of Menu Items in Adjustment Settings for Skilled Operators [Preprocessing: LCT] 0108: [Wide LCT: Fan Level] Adjust the airflow of the wide LCT for fanning the sheets. The wide LCT fans sheets by blowing air between the sheets before feeding them. By increasing the airflow, you can reduce multiple feeding and paper jams when printing on coated or thick paper.
  • Page 49: [Finishing: Finisher]

    Setting Values If the paper feed roller fails to pick up slippery paper such as coated paper, and misfeeding of paper occurs, set this to [On]. Setting Items Values Default Value [Wide LCT] [Auto Select] [Auto Select] [On] [Off] • This setting is not effective for paper fed from paper trays with custom paper presets. For such paper, the value specified in [Pickup Assist Setting] in [Advanced Settings] takes precedence.
  • Page 50 2. Details of Menu Items in Adjustment Settings for Skilled Operators Default Max. Min. Setting Items Step Unit Value Value Value [2 Holes Type JP / EU] -2.0 [3 Holes Type US] [4 Holes Type EU] [4 Holes Type NE] [2 Holes Type US] [1 Hole Type JP] 0402: [Punch Position: Across Feed]...
  • Page 51 Setting Values 0403: [Staple Position] Adjust the vertical position of the staples when using Finisher SR4120 or Finisher SR4130. Press [+] to move the position forward (up), or [−] to move it backward (down). Bottom Paper feed direction CDS028 Default Max.
  • Page 52 2. Details of Menu Items in Adjustment Settings for Skilled Operators 0404: [Staple Position for Booklet] Adjust the horizontal position of the booklet staples when using Finisher SR4130. Press [+] to move the position to the right (across horizontally-spreading pages), or press [−] to move it to the left.
  • Page 53 Setting Values Press [+] to move the position to the right (across horizontally-spreading pages), or press [−] to move it to the left. Folding position Paper feed direction CDS025 Default Max. Min. Setting Items Step Unit Value Value Value [A3 ] -3.0 [B4 JIS ] [A4 ]...
  • Page 54 2. Details of Menu Items in Adjustment Settings for Skilled Operators Setting Items Values Default Value [A3 ] [High] [High] [Middle] [B4 JIS ] [Low] [A4 ] [B5 JIS ] [12 × 18 ] [11 × 17 ] × 14 ] ×13 ×...
  • Page 55 Setting Values Default Max. Min. Setting Items Step Unit Value Value Value [A3 ] -1.0 [B4 JIS ] [A4 ] [A4 ] [B5 JIS ] [B5 JIS ] [A5 ] [12 × 18 ] [11 × 17 ] × 14 ] ×...
  • Page 56 2. Details of Menu Items in Adjustment Settings for Skilled Operators Setting Items Values Default Value [A3 ] [On] [On] [Off] [B4 JIS ] [A4 ] [A4 ] [B5 JIS ] [B5 JIS ] [A5 ] [12 × 18 ] [11 ×...
  • Page 57 Setting Values Default Max. Min. Setting Items Step Unit Value Value Value [A3 ] -1.0 [B4 JIS ] [A4 ] [A4 ] [B5 JIS ] [A5 ] [11 × 17 ] × 14 ] ×13 × 11 ] × 11 ] ×...
  • Page 58 2. Details of Menu Items in Adjustment Settings for Skilled Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 ] -1.0 [B4 JIS ] [A4 ] [A4 ] [B5 JIS ] [B5 JIS ] [11 × 17 ] ×...
  • Page 59 Setting Values Vertical alignment Jogger width Horizontal alignment Paper feed direction CEZ018 Default Max. Min. Setting Items Step Unit Value Value Value [A3 ] -1.0 [B4 JIS ] [A4 ] [B5 JIS ] [12 × 18 ] [11 × 17 ] ×...
  • Page 60 2. Details of Menu Items in Adjustment Settings for Skilled Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 ] [B4 JIS ] [A4 ] [A4 ] [B5 JIS ] [B5 JIS ] [11 × 17 ] ×...
  • Page 61 Setting Values Default Max. Min. Setting Items Step Unit Value Value Value [A3 ] [B4 JIS ] [A4 ] [B5 JIS ] [12 × 18 ] [11 × 17 ] × 14 ] ×13 × 11 ] [8K ] [Other Paper Sizes] 0801: [Staple Position: Across Feed 1] Adjust the vertical position of the staple (applied at an edge) when using Finisher SR5070 or Booklet Finisher SR5080.
  • Page 62 2. Details of Menu Items in Adjustment Settings for Skilled Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 ] [B4 JIS ] [A4 ] [A4 ] [B5 JIS ] [B5 JIS ] [11 × 17 ] ×...
  • Page 63 Setting Values Leading Trailing edge edge Paper feed direction DSN003 Default Max. Min. Setting Items Step Unit Value Value Value [A3 ] [B4 JIS ] [A4 ] [A4 ] [B5 JIS ] [B5 JIS ] [11 × 17 ] × 14 ] ×13 ×...
  • Page 64 2. Details of Menu Items in Adjustment Settings for Skilled Operators 0803: [Staple Position: With Feed] Adjust the horizontal position of the staples when using Finisher SR5070 or Booklet Finisher SR5080. Press [+] to move the stapling position away from the trailing edge of the sheet or [−] to move it toward the edge.
  • Page 65 Setting Values Default Max. Min. Setting Items Step Unit Value Value Value [A3 ] [B4 JIS ] [A4 ] [A4 ] [B5 JIS ] [B5 JIS ] [11 × 17 ] × 14 ] ×13 × 11 ] × 11 ] [8K ] [16K ] [16K ]...
  • Page 66 2. Details of Menu Items in Adjustment Settings for Skilled Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 ] -1.0 [B4 JIS ] [A4 ] [A4 ] [B5 JIS ] [B5 JIS ] [11 × 17 ] ×...
  • Page 67 Setting Values Default Max. Min. Setting Items Step Unit Value Value Value [A3 ] -2.5 [B4 JIS ] [A4 ] [A4 ] [B5 JIS ] [B5 JIS ] [11 × 17 ] × 14 ] ×13 × 11 ] × 11 ] [8K ] [16K ] [16K ]...
  • Page 68 2. Details of Menu Items in Adjustment Settings for Skilled Operators Default Max. Min. Setting Items Step Unit Value Value Value [A4 ] None [A4 ] None [B5 JIS ] None [B5 JIS ] None [11 × 17 ] None ×...
  • Page 69 Setting Values Default Max. Min. Setting Items Step Unit Value Value Value [2 Holes Type JP / EU] -2.0 [3 Holes Type US] [4 Holes Type EU] [4 Holes Type NE] [2 Holes Type US] 0808: [Punch Position: With Feed] Adjust the horizontal position of the punch holes when using Finisher SR5070 or Booklet Finisher SR5080.
  • Page 70 2. Details of Menu Items in Adjustment Settings for Skilled Operators 0809: [Correct Punch Skew] Specify whether or not to enable punch skew correction when using Finisher SR5070 or Booklet Finisher SR5080. If jams or edge-folding problems occur particularly when punching lightweight paper, select [Off]. Setting Items Values Default Value...
  • Page 71 Setting Values If [Speed Priority (Normal)] is selected, the shifting speed is reduced by approximately half to reduce them is alignment at the top due to inertia when the tray is moved. Setting Items Values Default Value [Paper Alignment in Shift Tray Setting] [Speed Priority [Speed Priority (Normal)]...
  • Page 72 2. Details of Menu Items in Adjustment Settings for Skilled Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 ] [B4 JIS ] [A4 ] [A4 ] [A5 ] [A5 ] [B5 JIS ] [B5 JIS ] [11 ×...
  • Page 73 Setting Values Setting Items Values Default Value [Output Tray Descending Position] [Default] [Default] [Lowest] [Lower] 0814: [Exit Guide Close Timing: Booklet Fin] Specify when to close the exit guide after paper is delivered to the finisher shift tray of Finisher SR5070 or Booklet Finisher SR5080.
  • Page 74 2. Details of Menu Items in Adjustment Settings for Skilled Operators 0816: [Output Fan Setting] Specify how the shift tray fan moves when using Finisher SR5070 or Booklet Finisher SR5080. To separate sheets stuck together, blow air to them that are delivered to the shift tray. Setting Items Values Default Value...
  • Page 75 Setting Values Default Max. Min. Setting Items Step Unit Value Value Value [A3 ] -1.0 [B4 JIS ] [A4 ] [B5 JIS ] [SRA3 ] [SRA4 ] [310 × 432mm ] [226 × 310mm ] [13 × 19 [13 × 19 ] [13 ×...
  • Page 76 2. Details of Menu Items in Adjustment Settings for Skilled Operators Folding position Paper feed direction CDS025...
  • Page 77 Setting Values Default Max. Min. Setting Items Step Unit Value Value Value [A3 ] -1.0 [B4 JIS ] [A4 ] [B5 JIS ] [SRA3 ] [SRA4 ] [310 × 432mm ] [226 × 310mm ] [13 × 19 [13 × 19 ] [13 ×...
  • Page 78 2. Details of Menu Items in Adjustment Settings for Skilled Operators Press [+] to make the width of the staple jogger wider, or [−] to make narrower. Vertical alignment Jogger width Horizontal alignment Paper feed direction CEZ018...
  • Page 79 Setting Values Default Max. Min. Setting Items Step Unit Value Value Value [A3 ] -0.5 [B4 JIS ] [A4 ] [B5 JIS ] [SRA3 ] [SRA4 ] [310 × 432mm ] [226 × 310mm ] [13 × 19 [13 × 19 ] [13 ×...
  • Page 80 2. Details of Menu Items in Adjustment Settings for Skilled Operators When you select "0", the default value, the finisher folds the booklet according to the number of sheets in the booklet, as shown below. • 1–13 sheets: 1 time •...
  • Page 81 Setting Values Default Max. Min. Setting Items Step Unit Value Value Value [A3 ] [B4 JIS ] [A4 ] [B5 JIS ] [SRA3 ] [SRA4 ] [310 × 432mm ] [226 × 310mm ] [13 × 19 [13 × 19 ] [13 ×...
  • Page 82 2. Details of Menu Items in Adjustment Settings for Skilled Operators If [On] is selected, skew is corrected by bringing the sheets flush against a guide. If [On (Reverse)] is selected, skew is corrected by bringing the sheets flush against a guide while the registration roller rotates in reverse to prevent the Z-folded sheets from passing through the registration roller.
  • Page 83: [Finishing: Fold]

    Setting Values Setting Items Values Default Value [Small Size (Paper Length: Less than 216.1 mm)] [Default] [Default] [1500 Sheets] [1000 Sheets] [Medium Size (Paper Length: 216.1 - 432.0 [Default] mm)] [1000 Sheets] [500 Sheets] [Large Size (Paper Length: More than 432.0 [Default] mm)] [500 Sheets]...
  • Page 84 2. Details of Menu Items in Adjustment Settings for Skilled Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 ] -4.0 [B4 JIS ] [A4 ] [B5 JIS ] [13 × 19 ] [12 × 18 ] [11 ×...
  • Page 85 Setting Values Default Max. Min. Setting Items Step Unit Value Value Value [B4 JIS ] -4.0 [A4 ] [B5 JIS ] -3.0 × 14 ] -4.0 × 13 × 11 ] [Other Paper Sizes] 0603: [Letter Fold-out Position 2: Multi-sheet Fold] Adjust the overall fold size (L) of letters fold-out sheets when using the multi-folding unit.
  • Page 86 2. Details of Menu Items in Adjustment Settings for Skilled Operators Default Max. Min. Setting Items Step Unit Value Value Value × 14 ] -4.0 × 13 × 11 ] [Other Paper Sizes] 0604: [Letter Fold-in Position 1: Multi-sheet Fold] Adjust the fold position of the bottom segment (S) of letters fold-in sheets when using the multi-folding unit.
  • Page 87 Setting Values Default Max. Min. Setting Items Step Unit Value Value Value [A3 ] -4.0 [B4 JIS ] [A4 ] [B5 JIS ] [12 × 18 ] [11 × 17 ] × 14 ] × 13 × 11 ] [8K ] [Other Paper Sizes] 0605: [Letter Fold-in Position 2: Multi-sheet Fold] Adjust the fold position (L) of letters fold-in sheets when using the multi-folding unit.
  • Page 88 2. Details of Menu Items in Adjustment Settings for Skilled Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 ] -4.0 [B4 JIS ] [A4 ] [B5 JIS ] [12 × 18 ] [11 × 17 ] ×...
  • Page 89 Setting Values A multi-sheet fold copy is counted as a single sheet. This setting becomes effective only if [Folding Unit Tray Full Detection] is set to [On]. Default Max. Min. Setting Items Step Unit Value Value Value [No. of Sheets Folded after Full sheet(s) Detection] •...
  • Page 90 2. Details of Menu Items in Adjustment Settings for Skilled Operators Default Max. Min. Setting Items Step Unit Value Value Value [A3 ] -4.0 [B4 JIS ] [A4 ] [12 18 ] [11 17 ] 14 ] 11 ] [8K ] [Other Paper Sizes] 0609: [Z-fold Position 2] Adjust the overall fold size (L) of Z-folded sheets when using the multi-folding unit.
  • Page 91 Setting Values Default Max. Min. Setting Items Step Unit Value Value Value [A3 ] -4.0 [B4 JIS ] [A4 ] [12 18 ] [11 17 ] 14 ] 11 ] [8K ] [Other Paper Sizes]...
  • Page 92 2. Details of Menu Items in Adjustment Settings for Skilled Operators...
  • Page 93: Custom Paper Settings For Administrators

    3. Custom Paper Settings for Administrators Accessing Advanced Settings Access Using the Control Panel Only the machine administrator can adjust the custom paper profiles registered in [Advanced Settings]. To directly access the advanced settings for custom paper adjustment, you must first configure your machine's Administrator Authentication Management setting.
  • Page 94 3. Custom Paper Settings for Administrators Press [Login]. Press [Login]. Enter your login user name, and then press [OK]. If you are logging in as the administrator for the first time, enter "admin". Enter your login password, and then press [OK]. Display the [Tray Paper Settings] screen.
  • Page 95: Access Using Web Image Monitor

    Accessing Advanced Settings Press [Edit Custom Paper]. Select the program number of the custom paper profile you wish to adjust. Press [ ]. Press [Change] for "Advanced Settings". The advanced settings for custom paper adjustment appear. Access Using Web Image Monitor Log in as the network administrator from Web Image Monitor.
  • Page 96 3. Custom Paper Settings for Administrators Check the radio button next to the number of the custom paper profile you wish to adjust, and then click [Program/Change]. The advanced settings for custom paper adjustment appear. Change the settings as desired, and then click [OK]. The setting is changed.
  • Page 97: Description Of Paper Icons

    Description of Paper Icons Description of Paper Icons You can check the custom paper status by checking the paper icon in the "Edit Custom Paper" screen. If you change the custom paper profile in the advanced settings, the paper icon changes as follows: DSN005 1.
  • Page 98: Deleting Saved Custom Paper Profiles

    3. Custom Paper Settings for Administrators Deleting Saved Custom Paper Profiles Only the machine administrator can delete the custom paper profile saved in the paper library. To delete custom paper profiles, you must first specify the machine administrator authentication information. Display the initial settings screen.
  • Page 99 Deleting Saved Custom Paper Profiles Press [Login]. Enter your login user name, and then press [OK]. If you are logging in as the administrator for the first time, enter "admin". Enter your login password, and then press [OK]. Display the [Tray Paper Settings] screen. •...
  • Page 100 3. Custom Paper Settings for Administrators Press [Delete from Library Archive]. Select the program number of the custom paper profile you wish to delete. Press [Yes]. The custom paper profile is deleted.
  • Page 101: Paper Presets In "Advanced Settings

    Paper Presets in "Advanced Settings" Paper Presets in "Advanced Settings" In "Advanced Settings", there are paper presets for various types of commercially-available paper. Even if you select a paper preset corresponding to a commercially-available paper from the Paper Library and register it in the [Edit Custom Paper] screen, the preset, depending on the custom paper profile version, may not be an exact match for the actual paper.
  • Page 102: Backing Up And Restoring Custom Paper Profiles

    3. Custom Paper Settings for Administrators Backing up and Restoring Custom Paper Profiles Backing up Custom Paper Profiles Saved in the Saved Paper Library The machine administrator can back up custom paper profiles saved in the Saved Paper Library to the SD card inserted in the back of the machine.
  • Page 103: Backing Up And Restoring Custom Paper Profiles Using The External Controller's Control Panel

    Backing up and Restoring Custom Paper Profiles Press 05: [Machine: Maintenance]. Press 0703: [Back Up / Restore Custom Paper Data]. Press [Back Up Custom Paper Settings]. Press [OK]. Restoring the Data Insert the SD card containing the backup custom paper profiles into the SD card slot on the side of the control panel.
  • Page 104 3. Custom Paper Settings for Administrators...
  • Page 105: Details Of Menu Items In Advanced Settings

    4. Details of Menu Items in Advanced Settings Menu Items and Functions Paper Feed Adjustment For details about the following items, see page 112 "Paper Feed Adjustment". Item Description [Wide LCT: Fan Setting] Specify the movement of the Wide LCT fan. [Wide LCT: Fan Level] Adjust the capacity of the Wide LCT fan.
  • Page 106 4. Details of Menu Items in Advanced Settings Item Description [Magnification: Across Adjust the vertical image scaling on Side 1 of the paper Feed: Side 1] according to the paper expansion or shrinkage. [Magnification: Across Adjust the vertical image scaling on Side 2 of the paper Feed: Side 2] according to the paper expansion or shrinkage.
  • Page 107 Menu Items and Functions Item Description [Second Transport Motor Adjust the second transport motor's speed. Feed Speed] [Third Transport Motor Feed Adjust the third transport motor's speed. Speed] [Relay Transport Motor Adjust the relay transport motor's rotation speed Feed Speed: CW] (clockwise rotation).
  • Page 108 4. Details of Menu Items in Advanced Settings Item Description [2 Sided Switchback Motor Adjust the 2-sided switchback motor's speed (clockwise Feed Speed: CW] rotation). [2 Sided Switchback Motor Adjust the 2-sided switchback motor's speed Feed Speed: CCW] (counterclockwise rotation). [2 Sided Exit Motor Feed Adjust the 2-sided exit motor's speed.
  • Page 109 Menu Items and Functions Item Description [Image Transfer Current: Adjust the current applied for image transfer when printing in each color mode (color/black-and-white). [Image Transfer Current: FC: K] [Image Transfer Current: FC: C] [Image Transfer Current: FC: M] [Image Transfer Current: FC: Y] [Paper Transfer Current: Adjust the current applied to the paper for paper transfer...
  • Page 110 4. Details of Menu Items in Advanced Settings Item Description [Paper Transfer Current: TE Adjust the area to apply the current for paper transfer at Length: BW] the trailing edge of the paper when printing in each color mode (black-and-white/color). [Paper Transfer Current: TE Length: FC] [Ppr Trns CV: Start Timing:...
  • Page 111 Menu Items and Functions Item Description [Contact Movement of Ppr Adjust the secondary transfer nip pressure when 045: Trns in Low Pressure] [Ppr Trns Contact Mode] is set to [Low Pressure]. [Textured Paper Mode] Specify whether or not to enable Textured Paper mode. [Textured Paper Mode Adjust the voltage applied to the paper for paper transfer Voltage: BW: Side 1]...
  • Page 112 4. Details of Menu Items in Advanced Settings Item Description [Fusing Nip Width Adjust the nip width between the fusing belt and pressure Adjustment: Envelope] roller when an envelope is being fed. [Fusing Nip Width: Specify whether to wait for heat to accumulate before Envelope: Decompression] printing on an envelope at a high/normal temperature.
  • Page 113 Menu Items and Functions Finishing Position Adjustment For details about the following items, see page 149 "Finishing Position Adjustment". Item Description [Z-fold Position 1] Adjust the width of the bottom end segment of Z- folded sheets when using the multi-folding unit. [Z-fold Position 2] Adjust the overall fold size of Z-fold sheets when using the multi-folding unit.
  • Page 114: Setting Values

    4. Details of Menu Items in Advanced Settings Setting Values Paper Feed Adjustment 065: [Wide LCT: Fan Setting] Specify the movement of the Wide LCT fan. If you set this to [On], air is discharged from the duct in the paper tray. By blowing air between the sheets, sheets stuck to each other can be separated.
  • Page 115: Paper Delivery Adjustment

    Setting Values Paper Delivery Adjustment 068: [Paper Weight Detection] Specify whether or not to detect the paper weight. If set to [On], a message appears on the control panel when the paper weight sensor detects paper of a weight other than that specified in [Tray Paper Settings]. Misdetection may occur for thin but heavy paper.
  • Page 116 4. Details of Menu Items in Advanced Settings Paper feed direction Left Right Default (Leading edge) (Trailing edge) Bottom CEZ015 Setting Items Max. Value Min. Value Step Unit [Image Position: Across Feed: Side 1] -3.0 002: [Image Position: Across Feed: Side 2] Adjust the vertical position of the image to be printed on Side 2 of the paper.
  • Page 117 Setting Values Press [+] to shift the image to the right (trailing edge). Press [−] to shift the image to the left (leading edge). Paper feed direction Default Left Right (Leading Edge) (Trailing Edge) Bottom CEZ012 Setting Items Max. Value Min.
  • Page 118 4. Details of Menu Items in Advanced Settings 005: [Magnification: Across Feed: Side 1] Adjust the vertical image scaling on the Side 1 of the paper according to the paper expansion or shrinkage. Setting the center of the paper as the base, press [+] to increase the scaling and [−] to reduce it. Paper feed direction dsn006 Setting Items...
  • Page 119 Setting Values 007: [Magnification: With Feed: Side 1] Adjust the horizontal image scaling on Side 1 of the paper according to the paper expansion or shrinkage. Press [+] to increase the scaling and [−] to reduce it. Paper feed direction DSN007 Setting Items Max.
  • Page 120 4. Details of Menu Items in Advanced Settings 009: [Erase Margin: Leading Edge] Adjust the mask width at the leading edge of the image. By increasing the mask width, you can increase the paper margin at the leading edge of the paper. Press [+] to increase the mask width and [−] to reduce it.
  • Page 121: Line Speed Adjustment

    Setting Values Line Speed Adjustment To prevent the paper becoming too tight or too slack during transfer, set all the line speed adjustment settings for the paper transfer path to the same value. However, if adjustment of individual items is necessary to correct image degradation, perform the adjustment according to the instructions in Troubleshooting.
  • Page 122 4. Details of Menu Items in Advanced Settings Setting Items Max. Value Min. Value Step Unit [Second Paper Motor Feed Speed] -3.0 072: [Third Paper Motor Feed Speed] Adjust the third paper feed motor's speed. Press [+] to increase the speed and [−] to reduce it. Setting Items Max.
  • Page 123 Setting Values Setting Items Max. Value Min. Value Step Unit [Registration Motor Feed Speed] -3.0 *1 The jitter occurs when the leading or trailing edge of paper that passes through the paper transfer unit is transmitted to the drum unit via the immediate transfer belt, causing banding. 076: [First Transport Motor Feed Speed] Adjust the first transport motor's speed.
  • Page 124 4. Details of Menu Items in Advanced Settings Setting Items Max. Value Min. Value Step Unit [Third Transport Motor Feed Speed] -3.0 080: [Relay Transport Motor Feed Speed: CW] Adjust the relay transport motor's rotation speed (clockwise rotation). The relay transport motor drives the relay transport roller, which feeds paper to the registration roller. This setting is applied when paper is fed from the machine's paper tray or optional LCT/Wide LCT.
  • Page 125 Setting Values Setting Items Max. Value Min. Value Step Unit [Paper Transfer Belt Speed Env corr: Low 0.01 Temp] [Paper Transfer Belt Speed Env corr: Normal Temp] [Paper Transfer Belt Speed Env corr: High Temp] 086 – 088: [Paper Feed Motor Speed Env corr] Adjust the speeds of the paper feed-related motors.
  • Page 126 4. Details of Menu Items in Advanced Settings Setting Items Max. Value Min. Value Step Unit [Paper Feed Motor Speed Env corr: Low Temp] [Paper Feed Motor Speed Env corr: Normal Temp] [Paper Feed Motor Speed Env corr: High Temp] 089: [Paper Output Motor Feed Speed] Adjust the exit motor's speed.
  • Page 127 Setting Values If you change 090: [Switchback Entrance Motor Feed Speed], increase or decrease this speed by the same amount. Setting Items Max. Value Min. Value Step Unit [Exit Switchback Motor Feed Speed: CW] -3.0 092: [Exit Switchback Motor Feed Speed: CCW] Adjust the counter-clockwise speed of the exit switchback rollers.
  • Page 128 4. Details of Menu Items in Advanced Settings Setting Items Max. Value Min. Value Step Unit [2 Sided Switchback Motor Feed Speed: -3.0 095: [2 Sided Switchback Motor Feed Speed: CCW] Adjust the 2-sided switchback motor's speed (counterclockwise rotation). Press [+] to increase the speed and [−] to reduce it. If you change 090: [Switchback Entrance Motor Feed Speed], increase or decrease this speed by the same amount.
  • Page 129 Setting Values paper with a feed length of more than 220 mm (8.66 inches) is used, both Shift Systems 1 and 2 can be used. • Enter the same value as that for 098: [2 Sided Transport Roller Shift 2]. Setting Items Max.
  • Page 130: Toner Adhesion Adjustment

    4. Details of Menu Items in Advanced Settings • [Middle] 50 cpm • [Low] 32 cpm Pro C5210S • [High] 80 cpm (full speed) • [Middle] 55.8 cpm • [Low] 35.7 cpm • In some cases, if you change this setting from [Low] to [Middle] or from [Middle] to [High], the toner may not properly fuse to the paper.
  • Page 131: Transfer Adjustment

    Setting Values 012: [Maximum Image Density: C] Adjust the intermediate transfer belt toner adhesion for cyan. Use this to adjust the density and color of the printed image. Depending on the paper being used, it may be necessary to make this adjustment to achieve optimal toner adhesion. Press [+] to increase the toner adhesion and [−] to reduce it.
  • Page 132 4. Details of Menu Items in Advanced Settings Press [+] to increase the current and [−] to reduce it. Setting Items Max. Value Min. Value Step Unit [Image Transfer Current: BW] 016: [Image Transfer Current: FC: K] Adjust the current for image transfer (black) when printing in full color. Use this to reduce image quality degradation due to the paper (for example, due to the paper's moisture content).
  • Page 133 Setting Values 019: [Image Transfer Current: FC: Y] Adjust the current for image transfer (yellow) when printing in full color. Use this to reduce image quality degradation due to the paper (for example, due to the paper's moisture content). Press [+] to increase the current and [−] to reduce it. Setting Items Max.
  • Page 134 4. Details of Menu Items in Advanced Settings Setting Items Max. Value Min. Value Step Unit [Paper Transfer Current: BW: Side 2] -300 027: [Paper Transfer Current: FC: Side 2] Adjust the current applied to Side 2 for paper transfer when printing in full color. Use this to reduce image quality degradation due to the paper (for example, due to the paper's moisture content).
  • Page 135 Setting Values 023: [Paper Transfer Current: LE Length: BW] Adjust the area at the leading edge of the paper for application of paper transfer current. Specify the length of area at the leading edge of the paper to which the current set in 022: [Paper Transfer Current: LE: BW] is applied.
  • Page 136 4. Details of Menu Items in Advanced Settings Specify the paper transfer currents as a percentage of the currents specified in 026: [Paper Transfer Current: FC: Side 1] and 027: [Paper Transfer Current: FC: Side 2]. Use this to reduce image quality degradation at the trailing edge of the paper. Press [+] to increase the percentage and [−] to reduce it.
  • Page 137 Setting Values • For the bias during paper transfer at the start of printing, the machine performs constant voltage control and then switches to constant current control. If you set "CV Start Timing" to "50ms" and "CV Control Duration" to "30ms", constant voltage control for the paper transfer bias starts 50 milliseconds before printing a sheet and lasts for 30 milliseconds,.
  • Page 138 4. Details of Menu Items in Advanced Settings Setting Items Max. Value Min. Value Step Unit [Ppr Trns CV: Start Timing: FC: Side 2] 039: [Ppr Trns CV: Duration: BW: Side 1] Adjust the duration of constant voltage control for the bias on Side 1 during paper transfer when printing in black-and-white mode.
  • Page 139 Setting Values Setting Items Max. Value Min. Value Step Unit [Ppr Trns CV Control Duration: FC: Side 1] 044: [Ppr Trns CV: Duration: FC: Side 2] Adjust the duration of constant voltage control for the bias on Side 2 during paper transfer when printing in full color.
  • Page 140 4. Details of Menu Items in Advanced Settings Setting Items Values [Ppr Trns Contact Mode] [High Speed] [Low Pressure] [Middle] [Low] [Low Speed For All Paper Type] [Off] *1 The jitter occurs when the leading or trailing edge of paper that passes through the paper transfer unit is transmitted to the drum unit via the immediate transfer belt, causing banding.
  • Page 141 Setting Values This adjustment is available when 045: [Ppr Trns Contact Mode] is set to [High Speed], [Middle], [Low], or [Low Speed For All Paper Type]. Setting Items Max. Value Min. Value Step Unit [Ppr Trns Gap: Off Timing] *1 The jitter occurs when the leading or trailing edge of paper that passes through the paper transfer unit is transmitted to the drum unit via the immediate transfer belt, causing banding.
  • Page 142 4. Details of Menu Items in Advanced Settings 032: [Textured Paper Mode] Specify whether or not to enable Textured Paper mode. If set to [On], the paper transfer voltage settings (66 – 73) are enabled. Setting Items Values [Textured Paper Mode] [On] [Off] 033: [Textured Paper Mode Voltage: BW: Side 1]...
  • Page 143: Fuser Adjustment

    Setting Values Setting Items Max. Value Min. Value Step Unit [Textured Paper Mode Voltage: FC: Side 14.0 036: [Textured Paper Mode Voltage: FC: Side 2] Adjust the paper transfer voltage applied to Side 1 when printing in full color with Textured Paper mode enabled.
  • Page 144 4. Details of Menu Items in Advanced Settings • Decreasing the temperature too much may cause the toner to not properly fuse to the paper. (cold offset). Setting Items Max. Value Min. Value Step Unit [Fusing Pressure Roller Temp] degree(s) 052: [Fusing Nip Width Setting] Adjust the nip width between the fusing belt and pressure roller.
  • Page 145 Setting Values Depending on the operating environment, the fusing temperature may drop before paper is transferred to the fusing unit. Use this function to prevent the fusing temperature dropping. Fusing temperature must be adjusted if a fusing error or abnormal luster occurs after three to ten pages of a multi-page job are printed.
  • Page 146 4. Details of Menu Items in Advanced Settings This must be adjusted if image quality degradation due to fusing (black spots) occurs when printing on glossy or matte paper. Setting Items Values [Cleaning Web Contact Position] [On] [Off] 058: [Fusing Nip Width Adjustment: Envelope] Adjust the nip width between the fusing belt and pressure roller when an envelope is being fed.
  • Page 147 Setting Values Setting Items Max. Value Min. Value Step Unit [Fusing Nip Width: Envelope: Decompression: L Temp] 061: [Accumulate Heat Before Feeding Envelope] Specify the time to wait for heat to accumulate before printing on an envelope. If fusing errors occur on an envelope, press [+] to increase the waiting time to reduce fusing errors. Pressing [-] will decrease the accumulation time, but fusing errors may occur.
  • Page 148 4. Details of Menu Items in Advanced Settings Automatic fusing refresh is performed once per 4.5 kp. • When [Smoothing Roller Auto Execute Setting] = [Do not Execute Automatically] and [Smoothing Roller Paper Type Ratio] = 40 Automatic fusing refresh is performed once per 1.8 kp. Setting Items Max.
  • Page 149 Setting Values Pro C5210S • [Do not Reduce] 80 cpm (full speed) • [Reduce Level 1] 64 cpm (80% of full speed) • [Reduce Level 2] 52 cpm (65% of full speed) • [Reduce Level 3] 40 cpm (50% of full speed) •...
  • Page 150 4. Details of Menu Items in Advanced Settings Pro C5210S • [Do not Reduce] 80 cpm (full speed) • [Reduce Level 1] 64 cpm (80% of full speed) • [Reduce Level 2] 52 cpm (65% of full speed) • [Reduce Level 3] 40 cpm (50% of full speed) •...
  • Page 151: Decurler Adjustment

    Setting Values Decurler Adjustment 100: [Paper Curl Correction Level] Adjust the degree of paper decurling by the decurler unit. Select between "1" (weak) and "5" (strong). Setting Items Max. Value Min. Value Step Unit [Paper Curl Correction Level] None 101: [Paper Curl Correction Level Adjustment] Adjust the contact pressure between the soft roller and metal roller in the decurler unit.
  • Page 152 4. Details of Menu Items in Advanced Settings Paper feed direction CEZ001 Setting Items Max. Value Min. Value Step Unit [Z-fold Position 1] -4.0 108: [Z-fold Position 2] Adjust the overall fold size (L) of Z- folded sheets when using the multi-folding unit. Press [+] to increase (L) and [−] to reduce it.
  • Page 153 Setting Values mark indicates the leading edge (relative to the paper feed direction), and the mark indicates the trailing edge. Paper feed direction CEZ002 Setting Items Max. Value Min. Value Step Unit [Adjust Half Fold Position: Single-sheet -4.0 Fold] 110: [Letter Fold-out Position 1: 1 sheet Fold] Adjust the fold position for the bottom segment (S2) of letter fold-out sheets when using the multi-folding unit.
  • Page 154 4. Details of Menu Items in Advanced Settings *1 For B5 paper, any adjustment greater than 3 mm is rounded down to 3 mm. 111: [Letter Fold-out Position 2: 1 sheet Fold] Adjust the overall fold size (L) of letter fold-out sheets when using the multi-folding unit. This setting will not be applied when the multi-sheet fold function is enabled.
  • Page 155 Setting Values Paper feed direction CEZ004 Setting Items Max. Value Min. Value Step Unit [Letter Fold-in Position 1: 1 sheet Fold] -4.0 113: [Letter Fold-in Position 2: 1 sheet Fold] Adjust the overall fold size (L) of letter fold-in sheets when using the multi-folding unit. This setting will not be applied when the multi-sheet fold function is enabled.
  • Page 156 4. Details of Menu Items in Advanced Settings 114: [Double Parallel Fold Position 1] Adjust the fold position of the bottom segment 1 (S1) of double parallel-folded sheets when using the multi-folding unit. Press [+] to increase (S1) and [−] to reduce it. The upper right illustration shows a partly opened, double parallel-folded sheet (folded in half), and the lower right illustration shows a fully folded sheet.
  • Page 157 Setting Values Paper feed direction CEZ007 Setting Items Max. Value Min. Value Step Unit [Double Parallel Fold Position 2] -4.0 116: [Gate Fold Position 1] Adjust the fold width of the bottom segment 1 (S1) of gate folded sheets when using the multi-folding unit.
  • Page 158 4. Details of Menu Items in Advanced Settings 117: [Gate Fold Position 2] Adjust the fold width of the bottom segment 2 (S2) of gate folded sheets when using the multi-folding unit. Press [+] to increase (S2) and [−] to reduce it. The upper right illustration shows a partly opened, gate folded sheet, and the lower right illustration shows a fully folded sheet.
  • Page 159 Setting Values Paper feed direction CEZ010 Setting Items Max. Value Min. Value Step Unit [Gate Fold Position 3] -4.0...
  • Page 160 MEMO...
  • Page 161 MEMO...
  • Page 162 MEMO D260-7043B...
  • Page 164 D260-7043B © 2016, 2017...

This manual is also suitable for:

Pro c5200sPro 5210s

Table of Contents

Save PDF