Installing The Driven Pulley Shaft Bearing - APRILIA M192M Workshop Manual

ENGINE
3.1.33. INSTALLING THE DRIVEN PULLEY SHAFT
BEARING
•
Warm the half case with the heat gun.
•
Fit a new driven pulley shaft bearing with its balls visi-
ble from inside the hub.
•
Fit the snap ring with its open side opposite to the
bearing.
•
Fit a new oil seal flush with the case on the pulley side.
3 - 36
Engines M192M / M191M / M245M / M234M / M282M / M281M