Engines M192M / M191M / M245M / M234M / M282M / M281M
3.1.10.
REMOVING THE CLUTCH
•
Use the adapter ring with its pins facing the clutch to
mount the clutch on the specific tool.
Universal tool for clutch assemblies: 8140259
Adapter for clutch unit disassembly: 8140665
WARNING
The tool must be firmly held in the vice with the
middle screw in contact with the tool.
Over tightening will damage the tool.
•
Check the proper insertion of the clutch in the ring be-
fore locking/unlocking the nut.
•
Ensure that clutch may be fully fitted into the adapter
ring.
•
Remove the nut. Open the tool and take out the driven
pulley, spring and clutch.
ENGINE
3 - 13