Checking Con-Rod Small End - APRILIA M192M Workshop Manual

Engines M192M / M191M / M245M / M234M / M282M / M281M
3.6.14.

CHECKING CON-ROD SMALL END

•
Using an inside micrometer gauge, check con-rod
small end diameter.
Standard diameter: 15.015 ÷ 15.025 mm
Max. allowed diameter: 15.030 mm
NOTE Should con-rod small end diameter be above the
specified limits, be worn or overheated, change crankshaft
as described in "Crankcase and crankshaft".
ENGINE
3 - 95